NSN 4720-01-497-5579 of Hose Assembly Nonmetallic - Parts Details
| Alternative NSN: 4720014975579 |
| Item Name: Hose Assembly Nonmetallic |
| FSG: 47 Pipe Tubing Hose and Fittings |
| Federal Supply Class (FSC): 4720 Hose and Flexible Tubing |
| NIIN: 014975579 |
| NCB Code: USA (01) |
| Manufacturers: Aai Corporation , Testek Inc |
ASAP Aviation Procurement, owned and operated by ASAP Semiconductor, is the latest parts procurement platform for the aerospace and aviation industry. Check out high demanding part numbers 3120-1081-111-08-72S under NSN 4720-01-497-5579 of Hose Assembly Nonmetallic manufactured by Aai Corporation, Testek Inc.
Federal Supply Class of NSN 4720-01-497-5579 is FSC 4720 contains part details of Hose and Flexible Tubing. Quote for your desired part numbers.
Part Number's List for NSN 4720-01-497-5579, 4720014975579
-
Part No Manufacturer Item Name QTY RFQ 3120-1081-111-08-72S Aai Corporation hose assembly nonmetallic Avl RFQ 3120-1081-111-08-72S Testek Inc hose assembly nonmetallic Avl RFQ
Characteristics Data of NSN 4720014975579MRC Criteria Characteristic AARX Inside Diameter 0.500 INCHES NOMINAL ABKV Outside Diameter 0.870 INCHES MINIMUM AND 0.908 INCHES MAXIMUM SUPP Supplementary Features USES FLUID 83282 HYDRAULIC OIL;RED OIL SERVICE AAJF Thread Direction RIGHT-HAND 2ND END ACKH Minimum Inside Bending Radius 7.000 INCHES CQCS Layer Composition And Location 1ST LAYER BRAIDED STEEL WIRE CQGM Maximum Operating Pressure 3500.0 POUNDS PER SQUARE INCH CRWL Inside Surface Condition SMOOTH CRDW Hydrostatic Test Pressure 7000.0 POUNDS PER SQUARE INCH AAJF Thread Direction RIGHT-HAND 1ST END AAJD Thread Class 2B 2ND END CBBL Features Provided NONSKIVE AKUU End Connection Design ELBOW 2ND END CXCY Part Name Assigned By Controlling Agency HOSE ASSY -08X72 INCHES 37 SWIVL FTG HP RED AKUU End Connection Design STRAIGHT 1ST END AKXL End Fitting Component And Material COMPLETE FITTING STEEL ALL ENDS CRFY Flow Angle 45.0 DEGREES 2ND END AKXM Fitting Component And Surface Treatment COMPLETE FITTING ANODIZE 1ST END THSD Thread Series Designator UNF 2ND END AWLS Connection Type THREADED INTERNAL HOSE 1ST END CRXX Measuring Method And Length 72.000 INCHES NOMINAL EXCLUDING END FITTINGS CQBD Burst Test Pressure 14000.0 POUNDS PER SQUARE INCH CRJM Outer Covering Environmental Protection OIL RESISTANT AND ABRASION RESISTANT AND WEATHERPROOF THSD Thread Series Designator JIC 1ST END AGAV End Item Identification REGULATOR ASSEMBLY-GROUND SUPPORT AWLS Connection Type THREADED INTERNAL HOSE 2ND END CMLP Thread Quantity Per Inch 16 2ND END AHNC Connection Style SWIVEL NUT, GASKET SEAL 1ST END CQJX Nominal Thread Size 0.750 INCHES 1ST END CQJX Nominal Thread Size 0.750 INCHES 2ND END AAGR Cross-Sectional Shape Style ROUND MRC Decoded Requirement Clear Text Reply AHNC Connection Style SWIVEL NUT, GASKET SEAL 2ND END CQCS Layer Composition And Location OUTER LAYER MOLDED RUBBER, SYNTHETIC CMLP Thread Quantity Per Inch 16 1ST END MEDA Media For Which Designed FUEL/OIL, HYDROCARBON SINGLE RESPONSE ABJH Temp Rating -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE FEAT Special Features INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; HOSE IS HIGH PRESSURE SERVICE WITH PETROLEUM BASE HYDRAULIC FLUIDS,WATER GLYCOL AND WATER-OIL FIRE RESISTANT HYDRAULIC FLUIDS,HOT OIL,GREASE,LUBRICANTS,CRUDE AND FUEL OILS,GASOLINE,AIR,WATER CQCS Layer Composition And Location 2ND LAYER MOLDED RUBBER, SYNTHETIC CQCS Layer Composition And Location 3RD LAYER BRAIDED STEEL WIRE
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | Inside Diameter | 0.500 INCHES NOMINAL |
| ABKV | Outside Diameter | 0.870 INCHES MINIMUM AND 0.908 INCHES MAXIMUM |
| SUPP | Supplementary Features | USES FLUID 83282 HYDRAULIC OIL;RED OIL SERVICE |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| ACKH | Minimum Inside Bending Radius | 7.000 INCHES |
| CQCS | Layer Composition And Location | 1ST LAYER BRAIDED STEEL WIRE |
| CQGM | Maximum Operating Pressure | 3500.0 POUNDS PER SQUARE INCH |
| CRWL | Inside Surface Condition | SMOOTH |
| CRDW | Hydrostatic Test Pressure | 7000.0 POUNDS PER SQUARE INCH |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| AAJD | Thread Class | 2B 2ND END |
| CBBL | Features Provided | NONSKIVE |
| AKUU | End Connection Design | ELBOW 2ND END |
| CXCY | Part Name Assigned By Controlling Agency | HOSE ASSY -08X72 INCHES 37 SWIVL FTG HP RED |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| CRFY | Flow Angle | 45.0 DEGREES 2ND END |
| AKXM | Fitting Component And Surface Treatment | COMPLETE FITTING ANODIZE 1ST END |
| THSD | Thread Series Designator | UNF 2ND END |
| AWLS | Connection Type | THREADED INTERNAL HOSE 1ST END |
| CRXX | Measuring Method And Length | 72.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CQBD | Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH |
| CRJM | Outer Covering Environmental Protection | OIL RESISTANT AND ABRASION RESISTANT AND WEATHERPROOF |
| THSD | Thread Series Designator | JIC 1ST END |
| AGAV | End Item Identification | REGULATOR ASSEMBLY-GROUND SUPPORT |
| AWLS | Connection Type | THREADED INTERNAL HOSE 2ND END |
| CMLP | Thread Quantity Per Inch | 16 2ND END |
| AHNC | Connection Style | SWIVEL NUT, GASKET SEAL 1ST END |
| CQJX | Nominal Thread Size | 0.750 INCHES 1ST END |
| CQJX | Nominal Thread Size | 0.750 INCHES 2ND END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| MRC | Decoded Requirement | Clear Text Reply |
| AHNC | Connection Style | SWIVEL NUT, GASKET SEAL 2ND END |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CMLP | Thread Quantity Per Inch | 16 1ST END |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; HOSE IS HIGH PRESSURE SERVICE WITH PETROLEUM BASE HYDRAULIC FLUIDS,WATER GLYCOL AND WATER-OIL FIRE RESISTANT HYDRAULIC FLUIDS,HOT OIL,GREASE,LUBRICANTS,CRUDE AND FUEL OILS,GASOLINE,AIR,WATER |
| CQCS | Layer Composition And Location | 2ND LAYER MOLDED RUBBER, SYNTHETIC |
| CQCS | Layer Composition And Location | 3RD LAYER BRAIDED STEEL WIRE |