NSN 5120-01-382-2675 of Puller Mechanical - Parts Details
| Alternative NSN: 5120013822675 |
| Item Name: Puller Mechanical |
| FSG: 51 Hand Tools |
| Federal Supply Class (FSC): 5120 Hand Tools Nonedged Nonpowered |
| NIIN: 013822675 |
| NCB Code: USA (01) |
| Manufacturers: United Technologies Corporation |
ASAP Aviation Procurement, owned and operated by ASAP Semiconductor, is the latest parts procurement platform for the aerospace and aviation industry. Check out high demanding part numbers PWA80888 under NSN 5120-01-382-2675 of Puller Mechanical manufactured by United Technologies Corporation.
Federal Supply Class of NSN 5120-01-382-2675 is FSC 5120 contains part details of Hand Tools Nonedged Nonpowered. Quote for your desired part numbers.
Part Number's List for NSN 5120-01-382-2675, 5120013822675
Characteristics Data of NSN 5120013822675MRC Criteria Characteristic ZZZV III FSC APPLICATION DATA JAW SET, PULLER NO. 1 BEARING REAR INNER RACE, LPC DRIVE SHAFT ENGINE SR-5 THE MANUFACTURERS DATA FTLD III FUNCTIONAL DESCRIPTION PULLER JAW SET IS REQUIRED TO REMOVE THE NO. 1 REAR BEARING INNER RACE WHILE THE LOW PRESSURE COMPRESSOR DRIVE SHAFT IS IN THE ENGINE. THIS TOOL USED FOR MAINTENANCE ON F117-PW-100 ENGE FEAT SPECIAL FEATURES PULLER JAW SET CONSISTS OF A STEEL PLATE, A STEEL RETAINING RING, THREESTEEL WASHER AND NUT SETS. JAWS ENGAGE THE NO. 1 BEARING REAR INNER RACE. THE RETAINING RING HOLDS THE JAWS IN PLACE. LEGS OF JAWS EXTEND THROUGH PLATE. PLATE MATES W/ ANOTHER TOOL THAT PROVIDES THE FORCE TO OVERCOME THE TIGHT FIT SR-5 MANUFACTURERS CODE 77445 SR-5 DESIGN CONTROL REFERENCE PWA80888
| MRC | Criteria | Characteristic |
|---|---|---|
| ZZZV | III FSC APPLICATION DATA | JAW SET, PULLER NO. 1 BEARING REAR INNER RACE, LPC DRIVE SHAFT ENGINE |
| SR-5 | THE MANUFACTURERS DATA | |
| FTLD | III FUNCTIONAL DESCRIPTION | PULLER JAW SET IS REQUIRED TO REMOVE THE NO. 1 REAR BEARING INNER RACE WHILE THE LOW PRESSURE COMPRESSOR DRIVE SHAFT IS IN THE ENGINE. THIS TOOL USED FOR MAINTENANCE ON F117-PW-100 ENGE |
| FEAT | SPECIAL FEATURES | PULLER JAW SET CONSISTS OF A STEEL PLATE, A STEEL RETAINING RING, THREESTEEL WASHER AND NUT SETS. JAWS ENGAGE THE NO. 1 BEARING REAR INNER RACE. THE RETAINING RING HOLDS THE JAWS IN PLACE. LEGS OF JAWS EXTEND THROUGH PLATE. PLATE MATES W/ ANOTHER TOOL THAT PROVIDES THE FORCE TO OVERCOME THE TIGHT FIT |
| SR-5 | MANUFACTURERS CODE | 77445 |
| SR-5 | DESIGN CONTROL REFERENCE | PWA80888 |