NSN 5340-01-498-2974 of Clamp Loop - Parts Details
| Alternative NSN: 5340014982974 |
| Item Name: Clamp Loop |
| FSG: 53 Hardware and Abrasives |
| Federal Supply Class (FSC): 5340 Hardware Commercial |
| NIIN: 014982974 |
| NCB Code: USA (01) |
| Manufacturers: Hamilton Sundstrand Corporation , Kirkhill Rubber Co |
ASAP Aviation Procurement, owned and operated by ASAP Semiconductor, is the latest parts procurement platform for the aerospace and aviation industry. Check out high demanding part numbers TA12C59H04CC under NSN 5340-01-498-2974 of Clamp Loop manufactured by Hamilton Sundstrand Corporation, Kirkhill Rubber Co.
Federal Supply Class of NSN 5340-01-498-2974 is FSC 5340 contains part details of Hardware Commercial. Quote for your desired part numbers.
Part Number's List for NSN 5340-01-498-2974, 5340014982974
-
Part No Manufacturer Item Name QTY RFQ TA12C59H04CC Hamilton Sundstrand Corporation clamp loop Avl RFQ TA12C59H04CC Kirkhill Rubber Co clamp loop Avl RFQ
Characteristics Data of NSN 5340014982974MRC Criteria Characteristic AAAL TONGUE HOLE TYPE ROUND, UNTHREADED AAAP CUSHIONING ENVIRONMENTAL PROTECTION ANY ACCEPTABLE ABMK OVERALL WIDTH 0.500 INCHES NOMINAL ABMZ DIAMETER 0.204 INCHES NOMINAL ABPX MATERIAL THICKNESS 0.030 INCHES NOMINAL AZCY CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.514 INCHES MINIMUM AND 0.544 INCHES MAXIMUM AZDC DISTANCE FROM LOOP CENTER TO TONGUE END 0.747 INCHES NOMINAL BZTN LOOP INSIDE DIAMETER 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM MATT MATERIAL STEEL COMP 321 OVERALL MDCL MATERIAL DOCUMENT AND CLASSIFICATION MIL-S-6721,TYPE 321 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL SFTT SURFACE TREATMENT PASSIVATE BAND STYL STYLE DESIGNATOR OFFSET MOUNT
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND, UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | ANY ACCEPTABLE |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.030 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.514 INCHES MINIMUM AND 0.544 INCHES MAXIMUM |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.747 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 321 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721,TYPE 321 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |