NSN 5905-00-980-0830 of Resistor Variable Wire Wound Pre - Parts Details
| Alternative NSN: 5905009800830 |
| Item Name: Resistor Variable Wire Wound Pre |
| FSG: 59 Electrical and Electronic Equipment Components |
| Federal Supply Class (FSC): 5905 Resistors |
| NIIN: 009800830 |
| NCB Code: USA (00) |
| Manufacturers: Teledyne Technologies Inc , Servo Instrument Corporation , Vishay Thin Film Llc |
ASAP Aviation Procurement, owned and operated by ASAP Semiconductor, is the latest parts procurement platform for the aerospace and aviation industry. Check out high demanding part numbers 808953, 751-2007, 750-153 under NSN 5905-00-980-0830 of Resistor Variable Wire Wound Pre manufactured by Teledyne Technologies Inc, Servo Instrument Corporation, Vishay Thin Film Llc.
Federal Supply Class of NSN 5905-00-980-0830 is FSC 5905 contains part details of Resistors. Quote for your desired part numbers.
Part Number's List for NSN 5905-00-980-0830, 5905009800830
Characteristics Data of NSN 5905009800830MRC Criteria Characteristic AAPN SECTION QUANTITY 3 AAQL BODY STYLE CYLINDRICAL SERVO MOUNTED AARG RELIABILITY INDICATOR NOT ESTABLISHED AAVL PILOT DIAMETER 0.7494 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM AAVM PILOT LENGTH 0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM ABPA UNDERCUT DIAMETER 0.7494 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM ABPC UNDERCUT WIDTH 0.0850 INCHES NOMINAL ABPM BODY DIAMETER 0.885 INCHES MAXIMUM ABWV SHAFT DIAMETER 0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM ABXF SHAFT LENGTH 0.470 INCHES NOMINAL ADAQ BODY LENGTH 1.550 INCHES NOMINAL AECZ MOUNTING LIP DIAMETER 0.8850 INCHES MAXIMUM AEDA MOUNTING LIP DEPTH 0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM AEDX SHAFT STYLE ROUND, SLOTTED AEDZ SHAFT BEARING TYPE BEARING AEFD ACTUATOR TYPE SINGLE SHAFT AEFH EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION 340.0 NOMINAL AEFK MAXIMUM STARTING TORQUE 0.30 INCH-OUNCES AEFL MAXIMUM RUNNING TORQUE 0.30 INCH-OUNCES AEFY SHAFT END PLAY 0.005 INCHES AEGC SHAFT RADIAL PLAY 0.001 INCHES APXH TERMINAL LOCATION RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE AXGY MOUNTING METHOD CLAMP RING CBBL FEATURES PROVIDED HUMIDITY PROOF CQCC ELECTRICAL RESISTANCE PER SECTION 10.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS CQCC ELECTRICAL RESISTANCE PER SECTION 10.0 PERCENT, RATED AMPERES C AND BETTER SELECT CQCC ELECTRICAL RESISTANCE PER SECTION 15.3 PERCENT, RATED AMPERES C AND BETTER FINISH CQCH TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION 238.0 1ST SECTION AND 283.0 1ST SECTION CQCH TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION 283.0 2ND SECTION CQCH TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION 283.0 3RD SECTION CQCK ROTARY ACTUATOR TRAVEL IN ANGULAR DEG 360.0 NOMINAL CQFL FUNCTION CONFORMITY TOLERANCE PER SECTION -0.40/+0.40 1ST SECTION CQFL FUNCTION CONFORMITY TOLERANCE PER SECTION -0.50/+0.50 2ND SECTION CQFL FUNCTION CONFORMITY TOLERANCE PER SECTION -0.50/+0.50 3RD SECTION CQGN AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER 85.0 ALL SECTIONS CRFJ TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS -20.0/+20.0 1ST SECTION CRFJ TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS -90.0/+90.0 2ND SECTION CRFJ TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS -90.0/+90.0 3RD SECTION CRGD POWER DISSIPATION RATING PER SECTION IN WATTS 1.0 FREE AIR ALL SECTIONS CRGM FUNCTION CONFORMITY PER SECTION ALL SECTIONS STEPPED CONFORMITY CRJS FIXED TAP QUANTITY PER SECTION 1 2ND SECTION CRJS FIXED TAP QUANTITY PER SECTION 1 3RD SECTION CRJS FIXED TAP QUANTITY PER SECTION 2 1ST SECTION CRKS TAP LOCATION TOLERANCE PER SECTION -1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS CRSS RESISTANCE TOLERANCE PER SECTION IN PERCENT -4.0/+4.0 ALL SECTIONS CRSX ACTUATOR TRAVEL CONTROL FEATURE CONTINUOUS MOTION CSBX FUNCTION CHARACTERISTIC PER SECTION ALL SECTIONS TABLE CSDH AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER 25.0 ALL SECTIONS PMLC PRECIOUS MATERIAL AND LOCATION TERMINALS GOLD AND TERMINALS SILVER PRMT PRECIOUS MATERIAL GOLD AND SILVER TEST TEST DATA DOCUMENT 98571-808953 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI TTQY TERMINAL TYPE AND QUANTITY 13 TURRET
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7494 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.7494 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0850 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.885 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.470 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.550 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 0.8850 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0600 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.30 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER SELECT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 15.3 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 238.0 1ST SECTION AND 283.0 1ST SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 283.0 2ND SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 283.0 3RD SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.40/+0.40 1ST SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 3RD SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 1ST SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -90.0/+90.0 2ND SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -90.0/+90.0 3RD SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS STEPPED CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 3RD SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 1ST SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -4.0/+4.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD AND TERMINALS SILVER |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| TEST | TEST DATA DOCUMENT | 98571-808953 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 13 TURRET |