Get a Competitive Quote for Part Number 209-062-109-1 of Bell Helicopter Textron Inc

Part No. : 209-062-109-1 Manufacturer : Bell Helicopter Textron Inc NSN : 3120-00-269-0684
Item Name : Bearing Plain Rod End CAGE Code : 97499 FSC : 3120 Bearings Plain Unmounted
Required Fields Compulsory *    
209-062-109-1 Bearing Plain Rod End
PART No. *
MANUFACTURER  
NSN
Quantity (EA) *
Target Price (EA) USD
NEED PARTS BY *
If You Have Multiple Parts Requirement, Then Upload Your Part List Here !
Note : We will not share your information to any third parties.

CONTACT INFORMATION

*

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Irvine, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.


For any additional queries regarding part number 209-062-109-1 by the Bell Helicopter Textron Inc, you can call us on our toll free number + 1-702-919-1616 or mail us at sales@asapaviationprocurement.com.


NSN Information for Part Number 209-062-109-1 with NSN 3120-00-269-0684, 3120002690684

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-00-269-0684

Item Description:

BEARING,PLAIN,ROD END

31200026906840N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
209-062-109-1221

Characteristics Data of NSN 3120-00-269-0684, 3120002690684

MRCCriteriaCharacteristic
AAZESHANK DIAMETER0.7270 INCHES MINIMUM AND 0.7290 INCHES MAXIMUM
AAZFSHANK STYLEHOLLOW, UNTHREADED
ABHPOVERALL LENGTH2.9100 INCHES NOMINAL
ABXVBORE DIAMETER0.3745 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM
AGGFOUTER MEMBER OUTSIDE DIAMETER1.3200 INCHES MAXIMUM
AGGGBORE CENTER TO SHANK END DISTANCE2.2500 INCHES NOMINAL
AGGHOUTER MEMBER WIDTH0.5000 INCHES MAXIMUM
AGGJINNER MEMBER WIDTH0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
AGHCSHANK INSIDE DIAMETER0.3750 INCHES NOMINAL
AGHDSHANK HOLE LENGTH1.3000 INCHES NOMINAL
AGKPSTATIC RADIAL LOAD RATING20000 POUNDS
MATTMATERIALCOPPER ALLOY INNER MEMBER
MATTMATERIALCOPPER ALLOY RACE INSERT
MATTMATERIALSTEEL COMP 4130 ROD END BODY
SFTTSURFACE TREATMENTCADMIUM ROD END BODY
STYLSTYLE DESIGNATORBALL TYPE

Related Components to 209-062-109-1