ASAP Aviation Procurement is pleased to announce that part number MS25038-4 of NSN 6680-00-553-8892 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number MS25038-4 is a Generator Tachometer manufactured by Aircraft Appliances And Equipment under CAGE Code 35076. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea).
| MRC | Criteria | Characteristic |
|---|---|---|
| AXGY | Mounting Method | PAD |
| ABWV | Shaft Diameter | 0.310 INCHES MINIMUM SINGLE END AND 0.312 INCHES MAXIMUM SINGLE END |
| BKPC | Calibration Voltage Output Type In Volts | 21.0 AC |
| MRC | Decoded Requirement | Clear Text Reply |
| BFLQ | Calibration Speed In Rpm | 4200 |
| CBBL | Features Provided | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| TEST | Test Data Document | 81349-MIL-G-9398 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| CWCS | Length Of Shaft From Housing | 0.467 INCHES SINGLE END |
| AXHR | Mounting Facility Type And Quantity | 4 UNTHREADED HOLE |
| AKCT | Shaft Rotation Direction | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| CWGD | Nominal Center To Center Distance Between Mounting Facilities Parallel To Height | 1.876 INCHES |
| CWFX | Rotor Speed Rating In Rpm | 5500.0 SINGLE FULL LOAD |
| CWFY | Nominal Center To Center Distance Between Mounting Facilities Parallel To Width | 1.876 INCHES |
| TTQY | Terminal Type And Quantity | 1 CONNECTOR, PLUG |
| ABXQ | Flatted Portion Length | 0.431 INCHES MINIMUM SINGLE END AND 0.503 INCHES MAXIMUM SINGLE END |
| AAJU | Overall Length | 4.312 INCHES |
| ASDB | Width Across Flats | 0.243 INCHES MINIMUM SINGLE END AND 0.245 INCHES MAXIMUM SINGLE END |
| CWHZ | Shaft End Characteristic | A15 SINGLE STYLE SINGLE END |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.
Request for Quote
