ASAP Aviation Procurement is pleased to announce that part number 3416-1205-1033 of NSN 3416-00-174-9171 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 3416-1205-1033 is a Lathe Engine manufactured by Federal Specifications under CAGE Code 81348. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea).
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | 2 HOLDER,LATHE TOOL,CUTTING OFF,STRAIGHT 3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE,TURNING,OFFSET,LH,3/8 BY 7/8 IN.SHANK,F/1/4 BY 1/4 IN.BIT;2 INDIC.,THREAD DIAL;2 KNURLING TOOL,REVOLVING HEAD,3/8 BY 7/8 BY 5-1/2 IN.SHANK,W/3 PR KNURLS DIAMOND SHAPE,FINE,MED.,COARSE 2 POST,TOOL,TO ACCOMMODATE 3/8 BY 7/8 IN.SHANK;2 REST,CPD.GRAD.,FOLLOWER,STEADY;2 SLEEVE,LATHE,H/STOCK SPINDLE;2 STOP,CARRIAGE,MICROMETER,THREAD CUTTING,ADJUSTABLE;2 SWITCH,208V,3 POS.START,STOP,REV.;2 TAPER ATTACHMENT,TELESCOPIC,LATHE" |
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| AWHA | Bed Type | SOLID |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | BENCH |
| ASHK | Electric Motor Horsepower Rating | 0.75 |
| ADQR | Center To Center Distance | 33.750 INCHES NOMINAL |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | +55.0 TO 1400.0 |
| BTTD | Rated Swing | 10.000 INCHES NOMINAL |
| BTTF | Actual Swing Over Bed | 10.125 INCHES NOMINAL |
| AKSL | Purpose For Which Designed | GENERAL |
| BTTG | Swing Over Cross Slide | 5.750 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | STEP CONE PULLEY, BACK GEARED" |
| AKYD | Accessory Components And Quantity | 2 BELT,FLAT,V-DR.;1 BENCH-LATHE;1BIT,LATHE TOOL HOLDER,HIGH SPEED STEEL,BORING,3/16BY3/16IN.TURNING 1/4BY1/4IN.;2 BLADE LATHE TOOL HOLDER,CUT OFF,HIGH SPEED STEEL,3/32BY5/8 IN.;2 CTR.,LATHE,PIPE,1/2BY 3 IN.;2 CTR.,LATHE,60 DEG.NO.2 MORSE TAPER;2 CHUCK,DRILL,3 JAW,0 TO 1/2 IN.;2 CHUCK,LATHE,FITTED,IND.,4 JAW,REV.,8 IN.,UNIV.,3 JAW,W/2 SETS JAWS,1 SET INTERNAL,1 SET EXT.,6 IN.;2 COLLET,SPLIT,F/ROUND WORK,1/16,1/8,3/16,1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,7/8,1 IN.;2 COLLET ATTACHMENT,H/WHEEL TYPE,1/16 TO 1 IN.;2 CUTTING ATTACHMENT,MILLING AND KEYWAY;2 LATHE,BENT TAIL,SINGLE SCREW,SINGLE,3/8,3/4,1-1/4,1-1/2,2-1/2 IN.;2 FACE PLATE,5-5/8,8-3/8 IN.;2 SET GEARS,METRIC TRANSPOSING,ENG.GRAD.;2 HOLDER,LATHE TOOL,TURNING,STRAIGHT,3/8 BY 7/8 IN.SHANK FOR 1/4 BY 1/4 IN.BIT,BORING,3/8 BY 7/8 IN.SHANK,COMP.W/9/16 IN.BAR AND 30,45,90 DEG.END CAPS FOR 3/16 IN.BITS,CUTTING OFF,RH,3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE" |
| BTWM | Headstock Center Taper Size Designator | 2 ASA STANDARD |
| BTYP | Hole Diameter Through Spindle | 1.375 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| FREQ | Frequency In Hertz | 60.0 |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +4.0 TO 80.0 PER INCH |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.
Request for Quote
