40607-01 by Rotron Incorporated with NSN 6105-00-958-6418 - Submit a Quote

Part Number:  40607-01
Alternate P/N:  4060701
Manufacturer:  rotron incorporated
CAGE Code:  82877
INC Code:  00530

ASAP Aviation Procurement is pleased to announce that part number 40607-01 of NSN 6105-00-958-6418 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 40607-01 is a Motor Alternating Current manufactured by Rotron Incorporated under CAGE Code 82877. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 40607-01

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 40607-01 with NSN 6105-00-958-6418, 6105009586418

NSNFSCNIINCLSHazmatDEMILCancelled NSN
6105-00-958-6418

Item PartTypeName:

MOTOR,ALTERNATING CURRENT

61050095864180N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
40607-01323

Characteristics Data of NSN 6105-00-958-6418, 6105009586418

MRCCriteriaCharacteristic
AAJTOVERALL HEIGHT3.500 INCHES
AAJUOVERALL LENGTH5.430 INCHES
AAJVOVERALL WIDTH4.000 INCHES
ABWVSHAFT DIAMETER0.3116 INCHES MINIMUM SINGLE END AND 0.3120 INCHES MAXIMUM SINGLE END
ABXQFLATTED PORTION LENGTH1.6200 INCHES NOMINAL SINGLE END
AGRBFLAT DEPTH0.0310 INCHES NOMINAL SINGLE END
AKAEMAXIMUM OPERATING ALTITUDE RATING12000.0 FEET
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END
AKPSDUTY CYCLECONTINUOUS
ANPZINCLOSURE FEATURETOTALLY INCLOSED
AXCPWINDING TYPEINDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE
AXGYMOUNTING METHODFIXED BASE AND FACE
AXHRMOUNTING FACILITY TYPE AND QUANTITY8 THREADED HOLE
BFMFCOOLING METHODNONVENTILATED
BKPBCURRENT RATING METHODLOAD
BKPQINCLOSURE SPECIFICATIONCOMMERCIAL
CBBLFEATURES PROVIDEDHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
CWCSLENGTH OF SHAFT FROM HOUSING1.620 INCHES SINGLE END
CWDMSHAFT CENTER TO MOUNTING SURFACE DISTANCE1.750 INCHES SINGLE END
CWDTNOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH0.812 INCHES
CWDYTEMP RATING-54.0 OPERATING DEG CELSIUS AND 62.0 OPERATING DEG CELSIUS AND 20.0 AMBIENT DEG CELSIUS
CWFQMOUNTING FACILITY CIRCLE DIAMETER2.620 INCHES
CWFXROTOR SPEED RATING IN RPM3350.0 SINGLE FULL LOAD
CWFYNOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH1.375 INCHES
CWGLCURRENT RATING IN AMPS2.100 SINGLE INPUT
CWGQCONNECTION TYPE AND VOLTAGE RATING IN VOLTS115.0 LINE TO NEUTRAL SINGLE INPUT
CWHZSHAFT END CHARACTERISTICA5 SINGLE STYLE SINGLE END
FAAZPHASESINGLE INPUT
FEATSPECIAL FEATURESSHAFT END STYLE A5,EXCEPT ADDITIONAL FLAT AT 90 DEG,SAME DIM. FOUR ADDITIONAL MOUNTING HOLES ON TOP
FREQFREQUENCY IN HERTZ50.0 INPUT OR 60.0 INPUT
TTQYTERMINAL TYPE AND QUANTITY4 WIRE LEAD

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top