NSN 5905-01-233-8466 of Resistor Variable Wire Wound Non - Parts Details
| Alternative NSN: 5905012338466 |
| Item Name: Resistor Variable Wire Wound Non |
| FSG: 59 Electrical and Electronic Equipment Components |
| Federal Supply Class (FSC): 5905 Resistors |
| NIIN: 012338466 |
| NCB Code: USA (01) |
| Manufacturers: Vdo Control Systems Inc , Aitek Instruments Llc , Vamistor Corp |
ASAP Aviation Procurement, owned and operated by ASAP Semiconductor, is the latest parts procurement platform for the aerospace and aviation industry. Check out high demanding part numbers R90135 01-0001, 318-160HS-50K under NSN 5905-01-233-8466 of Resistor Variable Wire Wound Non manufactured by Vdo Control Systems Inc, Aitek Instruments Llc, Vamistor Corp.
Federal Supply Class of NSN 5905-01-233-8466 is FSC 5905 contains part details of Resistors. Quote for your desired part numbers.
Part Number's List for NSN 5905-01-233-8466, 5905012338466
-
Part No Manufacturer Item Name QTY RFQ R90135 01-0001 Vdo Control Systems Inc resistor variable wire wound non Avl RFQ R90135 01-0001 Aitek Instruments Llc resistor variable wire wound non Avl RFQ 318-160HS-50K Vamistor Corp resistor variable wire wound non Avl RFQ
Characteristics Data of NSN 5905012338466MRC Criteria Characteristic AAPN SECTION QUANTITY 1 AAQL BODY STYLE RECTANGULAR W/MOUNTING HOLES AARG RELIABILITY INDICATOR ESTABLISHED AARH RELIABILITY FAILURE RATE LEVEL IN PERCENT 0.100 ABJT TERMINAL LENGTH 0.172 INCHES MINIMUM ABTB MOUNTING HOLE DIAMETER 0.073 INCHES NOMINAL ABWV SHAFT DIAMETER 0.078 INCHES NOMINAL ABXF SHAFT LENGTH 0.045 INCHES MAXIMUM ADAQ BODY LENGTH 0.500 INCHES NOMINAL ADAT BODY WIDTH 0.235 INCHES NOMINAL ADAU BODY HEIGHT 0.500 INCHES NOMINAL AEDX SHAFT STYLE ROUND, SLOTTED AEDZ SHAFT BEARING TYPE SLEEVE AEFD ACTUATOR TYPE SINGLE SHAFT AEFH EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION 7200.0 MINIMUM AND 15120.0 MAXIMUM AEFK MAXIMUM STARTING TORQUE 5.00 INCH-OUNCES AEFL MAXIMUM RUNNING TORQUE 5.00 INCH-OUNCES AEHT CENTER TO CENTER DISTANCE BETWEEN TERMINALS 0.200 INCHES NOMINAL AGAV III END ITEM IDENTIFICATION DATA RECONSTR AGTP LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS 0.520 INCHES NOMINAL AKPV MOUNTING FACILITY QUANTITY 2 APXH TERMINAL LOCATION LEFT ADJACENT SIDE TWO ROWS AXGY MOUNTING METHOD TERMINAL AND UNTHREADED HOLE AYQR CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS 0.100 INCHES NOMINAL CBME III CUBIC MEASURE 0.047 CUBIC INCHES CQCC ELECTRICAL RESISTANCE PER SECTION 50.0 KILOHMS SINGLE SECTION CQCK ROTARY ACTUATOR TRAVEL IN ANGULAR DEG 7200.0 MINIMUM AND 15120.0 MAXIMUM CQCM CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL 0.100 INCHES NOMINAL CQGN AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER 150.0 SINGLE SECTION CRFJ TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS -50.0 TO 50.0 SINGLE SECTION CRGD POWER DISSIPATION RATING PER SECTION IN WATTS 0.75 FREE AIR SINGLE SECTION CRSS RESISTANCE TOLERANCE PER SECTION IN PERCENT -5.0 TO 5.0 SINGLE SECTION CRSX ACTUATOR TRAVEL CONTROL FEATURE CLUTCH CSDH AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER 85.0 SINGLE SECTION TEST TEST DATA DOCUMENT 82227-R90135/01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR TTQY TERMINAL TYPE AND QUANTITY 3 PIN
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.078 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.045 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.500 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.235 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND 15120.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AGAV | III END ITEM IDENTIFICATION | DATA RECONSTR |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| CBME | III CUBIC MEASURE | 0.047 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 MINIMUM AND 15120.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 82227-R90135/01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DR |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |