LS5377-6T by A And M Aerospace Inc with NSN 5340-00-494-7595 - Submit a Quote

Part Number:  LS5377-6T
Alternate P/N:  LS53776T
Manufacturer:  a and m aerospace inc
Item Name :  bracket angle
CAGE Code:  6Z800
INC Code:  16900

ASAP Aviation Procurement is pleased to announce that part number LS5377-6T of NSN 5340-00-494-7595 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number LS5377-6T is a Bracket Angle manufactured by A And M Aerospace Inc under CAGE Code 6Z800. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LS5377-6T

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number LS5377-6T with NSN 5340-00-494-7595, 5340004947595

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-00-494-7595

Item PartTypeName:

BRACKET,ANGLE

53400049475950P
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
LS5988-2T016295

Characteristics Data of NSN 5340-00-494-7595, 5340004947595

MRCCriteriaCharacteristic
ADLKFIRST LEG LENGTH0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM
ADLLSECOND LEG LENGTH1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM
AHLFSECOND LEG WIDTH1.930 INCHES MINIMUM AND 2.110 INCHES MAXIMUM
AHLGSECOND LEG CORNER RADIUS0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
AHLKFIRST LEG HOLE DIAMETER0.227 INCHES MINIMUM AND 0.233 INCHES MAXIMUM
AHLNSECOND LEG HOLE DIAMETER0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM
AHLRSECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH1.370 INCHES MINIMUM AND 1.430 INCHES MAXIMUM
AHLSSECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH0.230 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
AHLTSECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
AHPWFIRST LEG THICKNESS0.016 INCHES NOMINAL
AHPXSECOND LEG THICKNESS0.016 INCHES NOMINAL
AHQNFIRST LEG WIDTH0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
AHQPFIRST LEG CORNER RADIUS0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
AJZUFIRST LEG STYLECORNER RADIUS
AKAUFIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
AKBUSECOND LEG STYLECORNER RADIUS
AKCUSECOND LEG HOLE ARRANGEMENT STYLETHREE HOLES
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
CSSQFIRST LEG ANGLE90.0 DEGREES NOMINAL
MATTMATERIALTITANIUM ALLOY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 4911 ASSN STD SINGLE MATERIAL RESPONSE
SFTTSURFACE TREATMENTCHROMATE ZINC
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONTT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE
STYLSTYLE DESIGNATORANGLE

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top