128CM10847-1 by Abm Equipment And Supply Llc with NSN 3110-00-975-0816 - Submit a Quote

Part Number:  128CM10847-1
Alternate P/N:  128CM108471
Item Name :  bearing ball rod end
CAGE Code:  65755
FSG:  31 Bearings
INC Code:  00049

ASAP Aviation Procurement is pleased to announce that part number 128CM10847-1 of NSN 3110-00-975-0816 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 128CM10847-1 is a Bearing Ball Rod End manufactured by Abm Equipment And Supply Llc under CAGE Code 65755. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 128CM10847-1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 128CM10847-1 with NSN 3110-00-975-0816, 3110009750816

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3110-00-975-0816

Item PartTypeName:

BEARING,BALL,ROD END

31100097508160N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
128CM10847-1225

Characteristics Data of NSN 3110-00-975-0816, 3110009750816

MRCCriteriaCharacteristic
AAZESHANK DIAMETER0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
AAZFSHANK STYLEHOLLOW
ABHPOVERALL LENGTH2.3440 INCHES NOMINAL
ABXVBORE DIAMETER0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
ADGAOVERALL OUTSIDE DIAMETER0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM
AGVTOUTER RING WIDTH0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM
AGVUINNER RING WIDTH0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM
AGXHLENGTH FROM BORE CENTER TO SHANK END1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM
AGXJSHANK BORE DIAMETER0.4372 INCHES MINIMUM AND 0.4382 INCHES MAXIMUM
AGXKSHANK BORE DEPTH1.1560 INCHES NOMINAL
AGYJSEAL QUANTITY2
AGYWBEARING SEAL TYPECONTACT
AGZAALIGNMENT TYPESELF-ALIGNING
AHAWSELF-ALIGNMENT LOCATIONINTERNAL
MATTMATERIALRUBBER SYNTHETIC SEAL
MATTMATERIALSTEEL BALL
MATTMATERIALSTEEL INNER RING
MATTMATERIALSTEEL OUTER RING
MATTMATERIALSTEEL SHAFT
SFTTSURFACE TREATMENTCADMIUM OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLSTYLE DESIGNATORDOUBLE ROW,STAGGERED,BALL

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top