HRS-6CFR-8 by Accurate Bushing Company with NSN 3110-00-533-9620 - Submit a Quote

Part Number:  HRS-6CFR-8
Alternate P/N:  HRS6CFR8
Manufacturer:  accurate bushing company
CAGE Code:  07484
FSG:  31 Bearings
INC Code:  00040

ASAP Aviation Procurement is pleased to announce that part number HRS-6CFR-8 of NSN 3110-00-533-9620 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number HRS-6CFR-8 is a Cam Follower Needle Bearing manufactured by Accurate Bushing Company under CAGE Code 07484. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HRS-6CFR-8

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number HRS-6CFR-8 with NSN 3110-00-533-9620, 3110005339620

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3110-00-533-9620

Item PartTypeName:

CAM FOLLOWER,NEEDLE BEARING

31100053396200N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS562-8FEE8223

Characteristics Data of NSN 3110-00-533-9620, 3110005339620

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.4220 INCHES NOMINAL
ABHPOVERALL LENGTH1.6410 INCHES MAXIMUM
ADGAOVERALL OUTSIDE DIAMETER1.1245 INCHES MINIMUM AND 1.1260 INCHES MAXIMUM
AGRJSTUD DIAMETER0.4985 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
AGVTOUTER RING WIDTH0.6510 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM
AGXFSTUD LENGTH0.9060 INCHES MINIMUM AND 0.9530 INCHES MAXIMUM
AGYJSEAL QUANTITY1
AGYWBEARING SEAL TYPECONTACT
CMLPTHREAD QUANTITY PER INCH20
CQJXNOMINAL THREAD SIZE0.500 INCHES
FEATSPECIAL FEATURESLUPRICATOR IN FLANGED END OF STUD,COTTER PIN HOLE IN STUD END
LBMALUBRICATION MATERIALGREASE
LMDCLUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATTMATERIALPLASTIC SEAL
MATTMATERIALSTEEL COMP E52100 OUTER RING
MATTMATERIALSTEEL COMP E52100 ROLLER
MATTMATERIALSTEEL COMP E52100 STUD
MATTMATERIALSTEEL END PLATE
SFTTSURFACE TREATMENTCADMIUM EXPOSED SURFACES AS MOUNTED
SFTTSURFACE TREATMENTCHROMIUM ROLLER
STYLSTYLE DESIGNATORCAM FOLLOWER
THSDTHREAD SERIES DESIGNATORUNJF
ZZZKSPECIFICATION/STANDARD DATA80205-NAS 562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top