584519-1 by Acro Matic Plastics Corp with NSN 3040-00-433-6213 - Submit a Quote

Part Number:  584519-1
Alternate P/N:  5845191
Manufacturer:  acro matic plastics corp
Item Name :  clamp hub
CAGE Code:  3D274
INC Code:  27781

ASAP Aviation Procurement is pleased to announce that part number 584519-1 of NSN 3040-00-433-6213 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 584519-1 is a Clamp Hub manufactured by Acro Matic Plastics Corp under CAGE Code 3D274. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 584519-1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 584519-1 with NSN 3040-00-433-6213, 3040004336213

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3040-00-433-6213

Item PartTypeName:

CLAMP,HUB

30400043362130N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
584519-121CA

Characteristics Data of NSN 3040-00-433-6213, 3040004336213

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH1.500 INCHES NOMINAL
ABMKOVERALL WIDTH0.437 INCHES NOMINAL
ABNMTHICKNESS0.250 INCHES NOMINAL
ABXVBORE DIAMETER0.2520 INCHES MINIMUM AND 0.2530 INCHES MAXIMUM
ADCQPLAIN HOLE DIAMETER0.1760 INCHES MINIMUM AND 0.1820 INCHES MAXIMUM
AEUYDISTANCE FROM BORE CENTERLINE TO END0.656 INCHES NOMINAL
AHYJCLAMP SECURING HOLE STYLETHREADED
AHYKCENTER TO CENTER DISTANCE BETWEEN SHAFT HOLE AND BORE0.625 INCHES NOMINAL
AJYPSCREW THREAD SERIES DESIGNATORUNC
CQJXNOMINAL THREAD SIZE0.164 INCHES
CSFNSURFACE FINISH AND LOCATION32 MICROINCHES INSIDE PERIPHERY
CSFNSURFACE FINISH AND LOCATION32 MICROINCHES OUTSIDE PERIPHERY
FEATSPECIAL FEATURESONE 0.094 IN. DIA HOLE LOCATED BETWEEN SHAFT AND BORE HOLE
MATTMATERIALSTEEL CORROSION RESISTING OR ALUMINUM ALLOY 2024
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4,ALLOY 2024,T4 FED SPEC 2ND MATERIAL RESPONSE
SFTTSURFACE TREATMENTANODIZE
STYLSTYLE DESIGNATORRECTANGULAR,SINGLE BOLT SECURED

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top