85-32881 by Aeronautical And Support Equipment with NSN 3120-01-322-0886 - Submit a Quote

Part Number:  85-32881
Alternate P/N:  8532881
Item Name :  bearing sleeve
CAGE Code:  07878
FSG:  31 Bearings
INC Code:  13205

ASAP Aviation Procurement is pleased to announce that part number 85-32881 of NSN 3120-01-322-0886 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 85-32881 is a Bearing Sleeve manufactured by Aeronautical And Support Equipment under CAGE Code 07878. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 85-32881

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 85-32881 with NSN 3120-01-322-0886, 3120013220886

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-01-322-0886

Item PartTypeName:

BEARING,SLEEVE

31200132208860N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
85-32881523

Characteristics Data of NSN 3120-01-322-0886, 3120013220886

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH2.1360 INCHES MINIMUM AND 2.1460 INCHES MAXIMUM
ADARBODY OUTSIDE DIAMETER0.4800 INCHES NOMINAL
ADASBODY INSIDE DIAMETER0.3300 INCHES NOMINAL
AGFHLEFT INTERNAL FLANGE HOLE DIAMETER0.2940 INCHES MINIMUM AND 0.3000 INCHES MAXIMUM
AGFJRIGHT INTERNAL FLANGE HOLE DIAMETER0.2940 INCHES MINIMUM AND 0.3000 INCHES MAXIMUM
AGFKLEFT INTERNAL FLANGE WIDTH0.6200 INCHES NOMINAL
AGFLRIGHT INTERNAL FLANGE WIDTH0.6200 INCHES NOMINAL
AGFQLEFT FLANGE OUTSIDE DIAMETER0.5006 INCHES MINIMUM AND 0.5012 INCHES MAXIMUM
AGFRRIGHT FLANGE OUTSIDE DIAMETER0.5006 INCHES MINIMUM AND 0.5012 INCHES MAXIMUM
AGFSLEFT FLANGE WIDTH0.6200 INCHES NOMINAL
AGFTRIGHT FLANGE WIDTH0.6200 INCHES NOMINAL
BZLXCORNER SHAPESQUARE ALL CORNERS
CQFMHARDNESS RATING40.0 ROCKWELL C MINIMUM OVERALL AND 46.0 ROCKWELL C MAXIMUM OVERALL
CSYMSURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
MATTMATERIALSTEEL COMP 440F OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5632 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLSTYLE DESIGNATORSOLID,EXTERNAL FLANGES BOTH ENDS,INTERNAL FLANGE AT BOTH ENDS

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top