AN179H27 by Aeronautical Standards Group with NSN 5306-00-151-0903 - Submit a Quote

Part Number:  AN179H27
Item Name :  bolt close tolerance
CAGE Code:  88044
FSC:  5306 Bolts
INC Code:  27851

ASAP Aviation Procurement is pleased to announce that part number AN179H27 of NSN 5306-00-151-0903 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number AN179H27 is a Bolt Close Tolerance manufactured by Aeronautical Standards Group under CAGE Code 88044. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AN179H27

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number AN179H27 with NSN 5306-00-151-0903, 5306001510903

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5306-00-151-0903

Item PartTypeName:

BOLT,CLOSE TOLERANCE

5306001510903N
CIICHCCESDPMICCriticalityENAC
A0
Part NumberISCRNVCRNCCHCCMSDSSADC
AN179H27222

Characteristics Data of NSN 5306-00-151-0903, 5306001510903

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.906 INCHES MINIMUM
AASBFASTENER LENGTH3.031 INCHES NOMINAL
AASKHEAD STYLEHEXAGON
AASUHEAD HEIGHT0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
AATBWIDTH BETWEEN FLATS0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
AAUBHOLE DIAMETER0.070 INCHES NOMINAL
AAURGRIP DIAMETER0.5611 INCHES MINIMUM AND 0.5616 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.141 INCHES NOMINAL FIRST HOLE
AHYMNOMINAL THREAD DIAMETER0.562 INCHES
ANEEGRIP LENGTH2.125 INCHES NOMINAL
ASXKHOLE QUANTITY1
BQDMHOLE TYPEDRILLED
CMLPTHREAD QUANTITY PER INCH18
CQBCMINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
CRHCHOLE CONFIGURATION STYLEHEXAGON FLATS
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.781 INCHES NOMINAL FIRST HOLE
CSYMSURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
CSYMSURFACE FINISH63.0 MICROINCHES GRIP
MATTMATERIALSTEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERI
SFTTSURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top