AN175C17 by Aeronautical Standards Group with NSN 5306-00-281-1644 - Submit a Quote

Part Number:  AN175C17
Item Name :  bolt close tolerance
CAGE Code:  88044
FSC:  5306 Bolts
INC Code:  27851

ASAP Aviation Procurement is pleased to announce that part number AN175C17 of NSN 5306-00-281-1644 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number AN175C17 is a Bolt Close Tolerance manufactured by Aeronautical Standards Group under CAGE Code 88044. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AN175C17

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number AN175C17 with NSN 5306-00-281-1644, 5306002811644

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5306-00-281-1644

Item PartTypeName:

BOLT,CLOSE TOLERANCE

53060028116440N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
AN175C17222

Characteristics Data of NSN 5306-00-281-1644, 5306002811644

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.499 INCHES MINIMUM AND 0.578 INCHES MAXIMUM
AASBFASTENER LENGTH1.953 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
AASKHEAD STYLEHEXAGON
AASUHEAD HEIGHT0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM
AATBWIDTH BETWEEN FLATS0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
AAURGRIP DIAMETER0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.076 INCHES NOMINAL FIRST HOLE
AHYMNOMINAL THREAD DIAMETER0.312 INCHES
ANEEGRIP LENGTH1.422 INCHES MINIMUM AND 1.454 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH24
CQBCMINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.781 INCHES MINIMUM AND 1.813 INCHES MAXIMUM FIRST HOLE
CSYMSURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
CSYMSURFACE FINISH63.0 MICROINCHES GRIP
MATTMATERIALSTEEL COMP 431 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
THSDTHREAD SERIES DESIGNATORUNF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top