CA2730 5 12 by Alcoa Global Fasteners Inc with NSN 5305-00-842-1641 - Submit a Quote

Part Number:  CA2730 5 12
Manufacturer:  alcoa global fasteners inc
Item Name :  screw close tolerance
CAGE Code:  29372
FSC:  5305 Screws
INC Code:  29294

ASAP Aviation Procurement is pleased to announce that part number CA2730 5 12 of NSN 5305-00-842-1641 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number CA2730 5 12 is a Screw Close Tolerance manufactured by Alcoa Global Fasteners Inc under CAGE Code 29372. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CA2730 5 12

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Characteristics Data of NSN 5305-00-842-1641, 5305008421641

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.312 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
AASBFASTENER LENGTH1.290 INCHES NOMINAL
AASKHEAD STYLEFLAT CHAMFER
AASLHEAD DIAMETER0.436 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
AASUHEAD HEIGHT0.253 INCHES MINIMUM AND 0.273 INCHES MAXIMUM
AAURGRIP DIAMETER0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZINTERNAL DRIVE STYLEHEXAGON
AHYMNOMINAL THREAD DIAMETER0.312 INCHES
ANEEGRIP LENGTH0.750 INCHES MINIMUM AND 0.790 INCHES MAXIMUM
ASDBWIDTH ACROSS FLATS0.210 INCHES MINIMUM AND 0.221 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH24
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.144 INCHES NOMINAL FIRST HOLE
FEATSPECIAL FEATURESRETAINING ELEMENT IN SHANK
MATTMATERIALSTEEL COMP 630 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONFMS 0131 FSCM 81755 MFR REF SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONZC00035 FSMC 29372 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top