1222021P2 by Bae Systems Inc with NSN 5905-00-826-3401 - Submit a Quote

Part Number:  1222021P2
Manufacturer:  bae systems inc
CAGE Code:  94117
INC Code:  37405

ASAP Aviation Procurement is pleased to announce that part number 1222021P2 of NSN 5905-00-826-3401 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 1222021P2 is a Resistor Variable Nonwire Wound manufactured by Bae Systems Inc under CAGE Code 94117. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1222021P2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 1222021P2 with NSN 5905-00-826-3401, 5905008263401

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-826-3401

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050082634010N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
7160223

Characteristics Data of NSN 5905-00-826-3401, 5905008263401

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
ADAVOVERALL DIAMETER0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.250 INCHES NOMINAL
AJYQSCREW THREAD QUANTITY PER INCH32.0
AXGYMOUNTING METHODSTANDARD BUSHING
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
CQTMTERMINAL LOCATIONREAR END
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 TAB,SOLDER LUG
AAQLBODY STYLECYLINDRICAL BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1.300 INCHES NOMINAL
ABPMBODY DIAMETER0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
ABXFSHAFT LENGTH0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
ADAQBODY LENGTH0.430 INCHES MINIMUM AND 0.470 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFPNONTURN DEVICE RADIUS0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
AJYPSCREW THREAD SERIES DESIGNATORUNEF
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top