Get a Competitive Quote for Part Number 204-040-196-1 of Bell Helicopter Textron Inc

Part No. : 204-040-196-1 Manufacturer : Bell Helicopter Textron Inc NSN : 5310-00-584-8249
Item Name : Washer Flat CAGE Code : 97499 FSC : 5310 Nuts and Washers
Required Fields Compulsory *    
204-040-196-1 Washer Flat
PART No. *
MANUFACTURER  
NSN
Quantity (EA) *
Target Price (EA) USD
NEED PARTS BY *
If You Have Multiple Parts Requirement, Then Upload Your Part List Here !
Note : We will not share your information to any third parties.

CONTACT INFORMATION

*

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Irvine, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.


For any additional queries regarding part number 204-040-196-1 by the Bell Helicopter Textron Inc, you can call us on our toll free number + 1-702-919-1616 or mail us at sales@asapaviationprocurement.com.


NSN Information for Part Number 204-040-196-1 with NSN 5310-00-584-8249, 5310005848249

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5310-00-584-8249

Item Description:

WASHER,FLAT

53100058482490N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
204-040-196-1223

Characteristics Data of NSN 5310-00-584-8249, 5310005848249

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLERECTANGULAR
AAUBHOLE DIAMETER0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
ABMWPERIPHERAL SHAPE STYLEROUND
ABMXCENTER HOLE SHAPE STYLEROUND
ABNMTHICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM
CQBCIII MINIMUM TENSILE STRENGTH64000 POUNDS PER SQUARE INCH
CSYMSURFACE FINISH63.0 MICROINCHES ALL SURFACES
MATTMATERIALALUMINUM ALLOY 2024 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

Related Components to 204-040-196-1