NAS1153E9A by Boeing Defence Australia with NSN 5305-01-582-5443 - Submit a Quote

Part Number:  NAS1153E9A
Manufacturer:  boeing defence australia
Item Name :  screw close tolerance
CAGE Code:  Z0HA9
FSC:  5305 Screws
INC Code:  29294

ASAP Aviation Procurement is pleased to announce that part number NAS1153E9A of NSN 5305-01-582-5443 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number NAS1153E9A is a Screw Close Tolerance manufactured by Boeing Defence Australia under CAGE Code Z0HA9. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NAS1153E9A

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number NAS1153E9A with NSN 5305-01-582-5443, 5305015825443

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-582-5443

Item PartTypeName:

SCREW,CLOSE TOLERANCE

5305015825443NA
CIICHCCESDPMICCriticalityENAC
AA0
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS1153E9A523

Characteristics Data of NSN 5305-01-582-5443, 5305015825443

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.276 INCHES NOMINAL
AASBFASTENER LENGTH0.838 INCHES NOMINAL
AASKHEAD STYLEFLAT COUNTERSUNK
AASLHEAD DIAMETER0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
AAURGRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE
ABQZINTERNAL DRIVE STYLETORQUE-SET RIBBED
AHYMNOMINAL THREAD DIAMETER0.190 INCHES
ANEEGRIP LENGTH0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH32
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.696 INCHES MINIMUM FIRST HOLE AND 0.736 INCHES MAXIMUM FIRST HOLE
MATTMATERIALSTEEL CORROSION RESISTING OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top