MC11-32 by Bowmar Llc with NSN 5905-00-809-5189 - Submit a Quote

Part Number:  MC11-32
Alternate P/N:  MC1132
Manufacturer:  bowmar llc
CAGE Code:  99957
INC Code:  37408

ASAP Aviation Procurement is pleased to announce that part number MC11-32 of NSN 5905-00-809-5189 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number MC11-32 is a Resistor Variable Wire Wound Pre manufactured by Bowmar Llc under CAGE Code 99957. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MC11-32

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number MC11-32 with NSN 5905-00-809-5189, 5905008095189

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-809-5189

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

5905008095189N
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
MC11-32293

Characteristics Data of NSN 5905-00-809-5189, 5905008095189

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AAVMPILOT LENGTH0.0620 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0620 INCHES NOMINAL
ABXFSHAFT LENGTH0.513 INCHES NOMINAL
ADAQBODY LENGTH2.650 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.436 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER1.0620 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0620 INCHES NOMINAL
AEDXSHAFT STYLEROUND
AEEASWITCH TYPEROTARY
AEEDSWITCH VOLTAGE RATING IN VOLTS28.0
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION340.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE10.00 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE5.00 INCH-OUNCES
AEFZSHAFT RUNOUT0.001 INCHES
AEGBPILOT DIAMETER RUNOUT0.001 INCHES
AEGCSHAFT RADIAL PLAY0.001 INCHES
AEGJSWITCH CONTACT ARRANGEMENTSINGLE POLE,SINGLE THROW,NORMALLY CLOSED
AXGYMOUNTING METHODCLAMP RING
CQCCELECTRICAL RESISTANCE PER SECTION20.0 KILOHMS SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
CSDKSWITCH CURRENT TYPE AND RATING IN AMPS3.000 DC
FEATSPECIAL FEATURESMAGNETIC CLUTCH INC. 2 TERMINALS FOR CLUTCH
TESTTEST DATA DOCUMENT82577-651895 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC. EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI
TTQYTERMINAL TYPE AND QUANTITY7 SOLDER STUD
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.9680 INCHES NOMINAL
ABHPOVERALL LENGTH3.163 INCHES NOMINAL
ABPAUNDERCUT DIAMETER0.968 INCHES NOMINAL
ABPMBODY DIAMETER1.062 INCHES MINIMUM
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL
AEDZSHAFT BEARING TYPEBEARING
AEFDACTUATOR TYPESINGLE SHAFT
AEFYSHAFT END PLAY0.001 INCHES
AEGALATERAL RUNOUT0.001 INCHES
AEGHSWITCH OPERATING POSITIONAB
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CBBLFEATURES PROVIDEDSWITCH
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top