WD5018 by Carroll Engineering Co with NSN 3020-00-823-5081 - Submit a Quote

Part Number:  WD5018
Manufacturer:  carroll engineering co
Item Name :  gear bevel
CAGE Code:  11708
INC Code:  05463

ASAP Aviation Procurement is pleased to announce that part number WD5018 of NSN 3020-00-823-5081 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number WD5018 is a Gear Bevel manufactured by Carroll Engineering Co under CAGE Code 11708. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for WD5018

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number WD5018 with NSN 3020-00-823-5081, 3020008235081

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3020-00-823-5081

Item PartTypeName:

GEAR,BEVEL

30200082350810N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
WS9030-15LH295

Characteristics Data of NSN 3020-00-823-5081, 3020008235081

MRCCriteriaCharacteristic
AAQLBODY STYLEPLAIN,SOLID
AJLATEETH QUANTITY42
ANTPBORE STYLEW/ KEYWAY BOTH ENDS
CWFRNOMINAL OVERALL LENGTH1.335 INCHES
CWMWTEETH TYPESPIRAL
CWTXHUB NOMINAL DIAMETER3.313 INCHES FIRST END
AGJSPITCH DIAMETER7.7200 INCHES NOMINAL
CQFMHARDNESS RATING56.0 ROCKWELL C MINIMUM OVERALL AND 61.0 ROCKWELL C MAXIMUM OVERALL
CWCDNOMINAL OUTSIDE DIAMETER7.769 INCHES
CWNMTOOTH DIRECTIONLEFT
CWPPPRESSURE ANGLE20.0000 DEGREES
CWQDPITCH ANGLE74.0500 DEGREES
CWQLNOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.250 INCHES SECOND END
CWRBBODY RECESS NOMINAL DEPTH0.106 INCHES FIRST END
CWRMFACE NOMINAL WIDTH1.125 INCHES
CWRSBORE NOMINAL DIAMETER2.502 INCHES BOTH ENDS
CWSNKEYWAY NOMINAL WIDTH0.500 INCHES BOTH ENDS
CWSRNOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM0.308 INCHES BOTH ENDS
CWTRHUB STYLE DESIGNATORPLAIN BOTH ENDS
CWTXHUB NOMINAL DIAMETER3.500 INCHES SECOND END
MATTMATERIALSTEEL OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-890,ALLOY N0.4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLSTYLE DESIGNATORPERIPHERAL FACE,FRONT HUB RECESSED,BACK HUB PROTRUDING
ZZZYREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY LH

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top