NAS335CP27 by Cast Metal Products Llc with NSN 5305-00-866-3096 - Submit a Quote

Part Number:  NAS335CP27
Manufacturer:  cast metal products llc
Item Name :  screw close tolerance
CAGE Code:  81215
FSC:  5305 Screws
INC Code:  29294

ASAP Aviation Procurement is pleased to announce that part number NAS335CP27 of NSN 5305-00-866-3096 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number NAS335CP27 is a Screw Close Tolerance manufactured by Cast Metal Products Llc under CAGE Code 81215. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NAS335CP27

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Generate New Image

Type the code from the image

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number NAS335CP27 with NSN 5305-00-866-3096, 5305008663096

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-00-866-3096

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050086630960N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS335CP2751CA

Characteristics Data of NSN 5305-00-866-3096, 5305008663096

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.432 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
AASKHEAD STYLEFLAT COUNTERSUNK
AAURGRIP DIAMETER0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.076 INCHES NOMINAL FIRST HOLE
AAWUSINGLE SHEAR STRENGTH7300 POUNDS PER SQUARE INCH
ABQZINTERNAL DRIVE STYLECROSS RECESS TYPE 1
AHYMNOMINAL THREAD DIAMETER0.312 INCHES
ANEEGRIP LENGTH2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.797 INCHES NOMINAL FIRST HOLE
MATTMATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4037 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 5TH MATE
SFTTSURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
THSDTHREAD SERIES DESIGNATORUNF
ZZZKSPECIFICATION/STANDARD DATA80205-NAS335 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
AASBFASTENER LENGTH2.953 INCHES MINIMUM AND 3.000 INCHES MAXIMUM
AASLHEAD DIAMETER0.625 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH24
CSYMSURFACE FINISH32.0 MICROINCHES GRIP
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top