375-05-05 PART 40-45-26 by Ederer Inc with NSN 5315-01-295-8806 - Submit a Quote

Part Number:  375-05-05 PART 40-45-26
Alternate P/N:  3750505PART404526
Manufacturer:  ederer inc
Item Name :  pin shoulder headless
CAGE Code:  63952
INC Code:  16749

ASAP Aviation Procurement is pleased to announce that part number 375-05-05 PART 40-45-26 of NSN 5315-01-295-8806 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 375-05-05 PART 40-45-26 is a Pin Shoulder Headless manufactured by Ederer Inc under CAGE Code 63952. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 375-05-05 PART 40-45-26

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 375-05-05 PART 40-45-26 with NSN 5315-01-295-8806, 5315012958806

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5315-01-295-8806

Item PartTypeName:

PIN,SHOULDER,HEADLESS

53150129588060N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
375-05-05 ITEM 10695

Characteristics Data of NSN 5315-01-295-8806, 5315012958806

MRCCriteriaCharacteristic
AAGZFIRST END STYLECHAMFERED
AAHPSECOND END STYLECHAMFERED AND COUNTERBORED
AASATHREAD LENGTH0.750 INCHES NOMINAL
AATRSHANK LENGTH0.750 INCHES NOMINAL
AAVHSHOULDER DIAMETER2.3745 INCHES MINIMUM AND 2.3750 INCHES MAXIMUM
AAZESHANK DIAMETER2.352 INCHES MINIMUM AND 2.360 INCHES MAXIMUM
ABHPOVERALL LENGTH6.562 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.125 INCHES NOMINAL
ABRBHOLE ARRANGEMENT STYLEONE END DRILLED
ABRCFIRST HOLE DIAMETER0.344 INCHES NOMINAL
ABREDISTANCE FROM CENTERLINE OF HOLE TO END OF PIN3.375 INCHES NOMINAL
AMFMSECOND END TAPER LENGTH0.125 INCHES NOMINAL
CMLPTHREAD QUANTITY PER INCH18
CQBBSECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
CRDYFIRST END LOCATIONTHREADED END
CSYMSURFACE FINISH63.0 MICROINCHES SHOULDER OUTSIDE DIAMETER
CTHCSECOND END TAPER ANGLE45.0 DEGREES NOMINAL
FEATSPECIAL FEATURESDRILL 0.344 IN. NOMINAL DIAMETER 3.562 INCH NOMINAL DEPTH LONGITUDINAL HOLE IN SHOULDER END,ON AXIAL CENTER INTERSECTING 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE,TAP WITH 0.125 NATIONAL PIPE THREAD TWO SYMMETRICAL GROOVES PARALLEL TO
STYLSTYLE DESIGNATORUNDERCUT

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top