AK79 by Emerson Electric Gmbh And Co with NSN 3020-01-361-5206 - Submit a Quote

ASAP Aviation Procurement is pleased to announce that part number AK79 of NSN 3020-01-361-5206 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number AK79 is a Pulley Groove manufactured by Emerson Electric Gmbh And Co under CAGE Code 71176. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AK79

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number AK79 with NSN 3020-01-361-5206, 3020013615206

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3020-01-361-5206

Item Description:

PULLEY,GROOVE

30200136152060N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
AK79C13

Characteristics Data of NSN 3020-01-361-5206, 3020013615206

MRCCriteriaCharacteristic
AWJQBearingsNOT INCLUDED
ANALTaper Bore Major Diameter0.996 INCHES NOMINAL
ABHPOverall Length1.469 INCHES NOMINAL
NMBRQuantity1
BSGGKeying FacilityINCLUDED
ABXVBore Diameter0.750 INCHES NOMINAL
AXNDCounterbore FeatureNOT INCLUDED
BXSKIntegral Cooling VaneNOT INCLUDED
MRCDecoded RequirementClear Text Reply
BYDZProtruding Hub CharacteristicSTEPPED
ABGFGroove Width0.500 INCHES NOMINAL
BSYGSplit Hub FeatureNOT INCLUDED
BXSNStandard V-Belt Section Designation For Which Designed4L AND A
AXHQGroove Quantity1
AEVFDistance From Center Of Bore To Bottom Of Keyway0.538 INCHES MINIMUM AND 0.630 INCHES MAXIMUM
ASBPBore TypeTAPERED
ANAMTaper Bore Minor Diameter0.812 INCHES NOMINAL
BXSJLightening HoleNOT INCLUDED
BYDWShaft Size For Which Designed0.750 INCHES NOMINAL
ABHEOutside Diameter7.750 INCHES NOMINAL
ABRRKeyway Width0.252 INCHES NOMINAL
AGGSV Groove Angle In Deg36
ADGEBore Length1.469 INCHES NOMINAL
BXSHWeb/Spoke Relationship To Face CenterlineNOT OFFSET
BYDSBore FeatureINCLUDED
ARJDDesign FormSPOKED
BSGKKeying Facility TypeKEYWAY
BXSMGroove ShapeV
BYZFDistance From Outside Flange/Rim To Hub End And Location0.718 INCHES NOMINAL AA END
ANNQMaterial And LocationIRON, CAST OVERALL
ABGAGroove Depth0.281 INCHES NOMINAL
STYLStyle DesignatorPLAIN
AQPLFace Width0.750 INCHES NOMINAL

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top