210308-1 by Enginetics Corporation with NSN 5340-01-458-5405 - Submit a Quote

Part Number:  210308-1
Alternate P/N:  2103081
Manufacturer:  enginetics corporation
Item Name :  bracket double angle
CAGE Code:  60168
INC Code:  20354

ASAP Aviation Procurement is pleased to announce that part number 210308-1 of NSN 5340-01-458-5405 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 210308-1 is a Bracket Double Angle manufactured by Enginetics Corporation under CAGE Code 60168. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 210308-1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 210308-1 with NSN 5340-01-458-5405, 5340014585405

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-01-458-5405

Item PartTypeName:

BRACKET,DOUBLE ANGLE

53400145854050P
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
LZ1019623

Characteristics Data of NSN 5340-01-458-5405, 5340014585405

MRCCriteriaCharacteristic
ADLKFIRST LEG LENGTH0.5400 INCHES NOMINAL
ADLLSECOND LEG LENGTH0.5400 INCHES NOMINAL
AHPWFIRST LEG THICKNESS0.0630 INCHES NOMINAL
AHPXSECOND LEG THICKNESS0.0630 INCHES NOMINAL
AHPZCENTER SECTION HEIGHT2.4000 INCHES NOMINAL
AHQACENTER SECTION WIDTH1.7500 INCHES NOMINAL
AHQBCENTER SECTION THICKNESS0.0630 INCHES NOMINAL
AHQNFIRST LEG WIDTH1.7500 INCHES NOMINAL
AJZUFIRST LEG STYLESQUARE
AKAUFIRST LEG HOLE ARRANGEMENT STYLENO HOLE
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
CSSQFIRST LEG ANGLE0.06 RADIANS NOMINAL
CSSRSECOND LEG ANGLE0.06 RADIANS NOMINAL
FEATSPECIAL FEATURESTHERE ARE TWO HOLES LOCATED ON TOP OF PIECE WITH A DIA. OF 0.180 IN. WITH A VARIOUS OF PLUS 0.005 IN. AND MINUS 0.001IN.; THEY ARE LOCATED 0.44 IN. FORM ENDS AND 0.875 FROM CENTER TO CENTER OF HOLES WIDTH AND 1,250 IN CENTER TO CENTER ALONG
MATTMATERIALSTEEL COMP 302 OR STEEL COMP 303
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766, COND A FED SPEC SINGLE MATERIAL RESPONSE
SFTTSURFACE TREATMENTPASSIVATE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
STYLSTYLE DESIGNATORADJACENT ANGLES

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top