54-0362 by Garsite Tsr Inc with NSN 5340-01-354-0271 - Submit a Quote

Part Number:  54-0362
Alternate P/N:  540362
Manufacturer:  garsite tsr inc
Item Name :  bracket angle
CAGE Code:  65154
INC Code:  16900

ASAP Aviation Procurement is pleased to announce that part number 54-0362 of NSN 5340-01-354-0271 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 54-0362 is a Bracket Angle manufactured by Garsite Tsr Inc under CAGE Code 65154. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 54-0362

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 54-0362 with NSN 5340-01-354-0271, 5340013540271

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-01-354-0271

Item PartTypeName:

BRACKET,ANGLE

53400135402710P
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
54-0362523

Characteristics Data of NSN 5340-01-354-0271, 5340013540271

MRCCriteriaCharacteristic
ADLKFIRST LEG LENGTH2.000 INCHES NOMINAL
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
STYLSTYLE DESIGNATORANGLE
ACHYMOUNTING HOLE TYPEPLAIN
ADLLSECOND LEG LENGTH3.000 INCHES NOMINAL
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.750 INCHES NOMINAL
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH1.500 INCHES NOMINAL
AKBUSECOND LEG STYLESQUARE
AKCUSECOND LEG HOLE ARRANGEMENT STYLETWO HOLES
AHLFSECOND LEG WIDTH5.500 INCHES NOMINAL
AHLKFIRST LEG HOLE DIAMETER0.375 INCHES NOMINAL
AHLNSECOND LEG HOLE DIAMETER0.375 INCHES NOMINAL
AHLPSECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH2.750 INCHES NOMINAL
AHQNFIRST LEG WIDTH5.500 INCHES NOMINAL
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.500 INCHES NOMINAL
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH1.000 INCHES NOMINAL
AKAUFIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
MATTMATERIALSTEEL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASTMA36 ASSN STD SINGLE MATERIAL RESPONSE
AHPWFIRST LEG THICKNESS0.250 INCHES NOMINAL
AHPXSECOND LEG THICKNESS0.250 INCHES NOMINAL
AHQUFIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH4.500 INCHES NOMINAL
AJZUFIRST LEG STYLESQUARE
CSSQFIRST LEG ANGLE90.0 DEGREES NOMINAL

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top