310E048-1 by Ge Aviation Systems Ltd with NSN 4730-01-181-8494 - Submit a Quote

Part Number:  310E048-1
Alternate P/N:  310E0481
Manufacturer:  ge aviation systems ltd
CAGE Code:  4N727
INC Code:  29653

ASAP Aviation Procurement is pleased to announce that part number 310E048-1 of NSN 4730-01-181-8494 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 310E048-1 is a Adapter Straight Flange To Boss manufactured by Ge Aviation Systems Ltd under CAGE Code 4N727. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 310E048-1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 310E048-1 with NSN 4730-01-181-8494, 4730011818494

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4730-01-181-8494

Item PartTypeName:

ADAPTER,STRAIGHT,FLANGE TO BOSS

47300118184940N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
310E048-1525

Characteristics Data of NSN 4730-01-181-8494, 4730011818494

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A 2ND END
AECSBOLT HOLE QUANTITY8 1ST END
AGAVEND ITEM IDENTIFICATION41N HELICOPTER,CH-53A/D/E
AHNCCONNECTION STYLEEXTERNAL SEAT FOR GASKET SEAL BOSS) 2ND END
AHSJLEG LENGTH0.500 INCHES NOMINAL 2ND END
ARKNFLANGE SHAPEROUND WITH HOLES 1ST END
AWLSCONNECTION TYPEFLANGE 1ST END
AWLSCONNECTION TYPETHREADED EXTERNAL BOSS 2ND END
CMLPTHREAD QUANTITY PER INCH16 2ND END
CQJXNOMINAL THREAD SIZE1.250 INCHES 2ND END
CWCDNOMINAL OUTSIDE DIAMETER1.625 INCHES 1ST END
CWCKNOMINAL THICKNESS0.125 INCHES 1ST END
CWCQBOLT HOLE NOMINAL DIAMETER0.126 INCHES 1ST END
CWCTBOLT CIRCLE NOMINAL DIAMETER0.950 INCHES 1ST END
CWDFFLANGE FACE DESIGNPLAIN 1ST END
CWFRNOMINAL OVERALL LENGTH0.600 INCHES
FEATSPECIAL FEATURESFLANGED END THREADED INTERNALLY WITH 0.750-16UNF-3B THREADS
MATTMATERIALALUMINUM ALLOY 2024 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUN 2ND END
ZZZKSPECIFICATION/STANDARD DATA62793-310E048 MANUFACTURERS SPECIFICATION
ZZZTNONDEFINITIVE SPEC/STD DATA1 FIGURE

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top