081903 by General Motors Corp with NSN 5307-00-359-1260 - Submit a Quote

Part Number:  081903
Manufacturer:  general motors corp
CAGE Code:  7X677
FSC:  5307 Studs
INC Code:  15944

ASAP Aviation Procurement is pleased to announce that part number 081903 of NSN 5307-00-359-1260 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 081903 is a Stud Shouldered And Stepped manufactured by General Motors Corp under CAGE Code 7X677. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 081903

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 081903 with NSN 5307-00-359-1260, 5307003591260

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5307-00-359-1260

Item PartTypeName:

STUD,SHOULDERED AND STEPPED

5307003591260N
CIICHCCESDPMICCriticalityENAC
U0
Part NumberISCRNVCRNCCHCCMSDSSADC
103934223

Characteristics Data of NSN 5307-00-359-1260, 5307003591260

MRCCriteriaCharacteristic
AAJETHREAD PITCH DIAMETERS0.7044 TO 0.7084 INCHES NUT THREAD
AAJETHREAD PITCH DIAMETERS1.0764 TO 1.0804 INCHES STUD THREAD
AAJFTHREAD DIRECTIONRIGHT-HAND NUT THREAD
AAJFTHREAD DIRECTIONRIGHT-HAND STUD THREAD
AASATHREAD LENGTH0.969 INCHES MAXIMUM NUT THREAD
AASATHREAD LENGTH1.219 INCHES MAXIMUM STUD THREAD
AAVHSHOULDER DIAMETER1.125 INCHES MINIMUM AND 1.219 INCHES MAXIMUM
AAVKSHOULDER LENGTH0.188 INCHES NOMINAL
ABHPOVERALL LENGTH3.188 INCHES MINIMUM AND 3.313 INCHES MAXIMUM
ADDBNUT END SHANK LENGTH0.750 INCHES NOMINAL
AWTQDISTANCE ACROSS FLATS0.938 INCHES MINIMUM AND 0.969 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH16 STUD THREAD
CQJXNOMINAL THREAD SIZE0.750 INCHES NUT THREAD
CQJXNOMINAL THREAD SIZE1.125 INCHES STUD THREAD
CSJZSTUD END SHANK LENGTH0.187 INCHES NOMINAL
CSXHSTUD END SHANK DIAMETER1.077 INCHES MINIMUM AND 1.080 INCHES MAXIMUM
CTDTNUT END SHANK DIAMETER0.783 INCHES MINIMUM AND 0.786 INCHES MAXIMUM
MATTMATERIALSTEEL COMP 3120H OR STEEL COMP 8640 OR STEEL COMP 8740 OR STEEL COMP 4340
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE
STYLSTYLE DESIGNATORSHOULDERED AND STEPPED
THSDTHREAD SERIES DESIGNATORUNS NUT THREAD
THSDTHREAD SERIES DESIGNATORUNS STUD THREAD

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top