167-6404610-41 by Huntington Ingalls Incorporated with NSN 3120-01-449-8976 - Submit a Quote

Part Number:  167-6404610-41
Alternate P/N:  167640461041
Item Name :  bearing sleeve
CAGE Code:  43689
FSG:  31 Bearings
INC Code:  13205

ASAP Aviation Procurement is pleased to announce that part number 167-6404610-41 of NSN 3120-01-449-8976 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 167-6404610-41 is a Bearing Sleeve manufactured by Huntington Ingalls Incorporated under CAGE Code 43689. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 167-6404610-41

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 167-6404610-41 with NSN 3120-01-449-8976, 3120014498976

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-01-449-8976

Item PartTypeName:

BEARING,SLEEVE

31200144989760N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
167-6404610-41523

Characteristics Data of NSN 3120-01-449-8976, 3120014498976

MRCCriteriaCharacteristic
BZLXCorner ShapeSQUARE OUTSIDE LEFT CORNER
BZLXCorner ShapeSQUARE INSIDE LEFT CORNER
ADARBody Outside Diameter1.4393 INCHES MINIMUM AND 1.4398 INCHES MAXIMUM
BZLXCorner ShapeUNDERCUT LEFT FLANGE BODY CORNER
AGFFFlange Width0.0887 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM
ADASBody Inside Diameter1.2505 INCHES MINIMUM AND 1.2515 INCHES MAXIMUM
MRCDecoded RequirementClear Text Reply
MATTMaterialSTEEL COMP 630 OUTER LAYER
ABHPOverall Length2.5862 INCHES NOMINAL
MDCLMaterial Document And ClassificationKARON V, CAGEC 50632 MFR REF SINGLE MATERIAL RESPONSE INNER LAYER
BZLXCorner ShapeSQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CSYMSurface Finish63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
STYLStyle DesignatorSOLID, EXTERNAL FLANGE ONE END
AEPRFlange Outside Diameter1.9800 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM
MDCLMaterial Document And ClassificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
MATTMaterialPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
BZLXCorner ShapeSQUARE OUTSIDE RIGHT CORNER
BZLXCorner ShapeSQUARE INSIDE RIGHT CORNER

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top