27719 by J Richard Weggel with NSN 5990-00-997-5237 - Submit a Quote

Part Number:  27719
Manufacturer:  j richard weggel
CAGE Code:  09958
INC Code:  27218

ASAP Aviation Procurement is pleased to announce that part number 27719 of NSN 5990-00-997-5237 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 27719 is a Synchro Receiver Transmitter manufactured by J Richard Weggel under CAGE Code 09958. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 27719

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 27719 with NSN 5990-00-997-5237, 5990009975237

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5990-00-997-5237

Item PartTypeName:

SYNCHRO,RECEIVER-TRANSMITTER

59900099752370N
CIICHCCESDPMICCriticalityENAC
7A0
Part NumberISCRNVCRNCCHCCMSDSSADC
M20708/32-01A323

Characteristics Data of NSN 5990-00-997-5237, 5990009975237

MRCCriteriaCharacteristic
AAFZBODY MATERIALSTEEL,STAINLESS
AAQLBODY STYLESTANDARD ROUND C
AAVHSHOULDER DIAMETER1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM
AAVLPILOT DIAMETER0.9370 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM
ABHPOVERALL LENGTH3.0600 INCHES NOMINAL
ABKKFLANGE DIAMETER1.7450 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM
ABKUFLANGE THICKNESS0.0930 INCHES NOMINAL
ABPAUNDERCUT DIAMETER1.6250 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0780 INCHES NOMINAL
ABWVSHAFT DIAMETER0.1873 INCHES MINIMUM SINGLE SHAFT AND 0.1875 INCHES MAXIMUM SINGLE SHAFT
ABXFSHAFT LENGTH0.5400 INCHES NOMINAL SINGLE SHAFT
AFJNFRAGILITY FACTORMODERATELY RUGGED
AHCGMAXIMUM TEMP RISE35.0 DEG CELSIUS
AJSLBODY SIZE18
AJSRROTOR INPUT VOLTAGE RATING IN VOLTS115.0 NOMINAL
AJSSFREQUENCY IN HERTZ400.0 NOMINAL
AJSTROTOR INPUT CURRENT RATING400.0 MILLIAMPERES MAXIMUM
AJSVROTOR INPUT ELECTRICAL POWER RATING4.0 WATTS MAXIMUM
AJTNZSS IMPEDANCE MAGNITUDE IN OHMS16.00 MINIMUM AND 21.00 MAXIMUM
AJTPZSS IMPEDANCE ANGLE IN DEG38.00 MINIMUM AND 45.00 MAXIMUM
AJVFPHASE SHIFT ANGLE IN DEG4.000 INPUT TO OUTPUT MAXIMUM
AJVGMAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT50.00 OUTPUT
AJVHMAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT100.00
AJVLELECTRICAL ERROR ANGULAR RANGE IN MINUTES-8.0 TO 8.0
AJVMSPLINE TOOTH QUANTITY21 SINGLE SHAFT
AJVNRECEIVER ERROR ANGULAR RANGE IN MINUTES-45.0 TO 45.0
AJVVTORQUE GRADIENT PER ANGULAR DEG0.100 INCH-OUNCES MINIMUM
AJVWALIGNMENT HOLE QUANTITY4
AJWQPILOT LENGTH0.0400 INCHES NOMINAL
AJWRSHOULDER LENGTH0.1320 INCHES NOMINAL
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE2.5200 INCHES NOMINAL
AJXASPLINE TOOTH DIAMETRAL PITCH120 SINGLE SHAFT
AJYYSHAFT THREAD SERIES DESIGNATORUNF SINGLE SHAFT
AKAFSHAFT THREAD DIRECTIONRIGHT-HAND SINGLE SHAFT
AKANSHAFT THREAD CLASS2A SINGLE SHAFT
CQTMTERMINAL LOCATIONREAR
CQWQSHAFT THREAD LENGTH0.2000 INCHES NOMINAL SINGLE SHAFT
CRSJSHAFT TYPESPLINE W/THREADS SINGLE SHAFT
CRSYALIGNMENT HOLE DEPTH0.1250 INCHES MINIMUM
CSJYTRANSFORMATION RATIO0.783 STATOR TO ROTOR NOMINAL
CTCWALIGNMENT HOLE BOLT CIRCLE DIAMETER1.2500 INCHES NOMINAL
CWBHSHAFT NOMINAL THREAD SIZE0.190 INCHES SINGLE SHAFT
TESTTEST DATA DOCUMENT81349-MIL-S-20708 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
TTQYTERMINAL TYPE AND QUANTITY5 SCREW
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-S-20708/32 GOVERNMENT SPECIFICATION

Complete Aerospace and NSN Parts Purchasing Platform

asacb

AS9120B and ISO 9001:2015

asa_member

Aviation Suppliers Association Member

certified

FAA AC 0056B Accredited

supplier

AS 6081:2012 Certification

association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top