90338-8 by Langley Corp with NSN 5315-01-175-6666 - Submit a Quote

Part Number:  90338-8
Alternate P/N:  903388
Manufacturer:  langley corp
Item Name :  pin shoulder headless
CAGE Code:  83549
INC Code:  16749

ASAP Aviation Procurement is pleased to announce that part number 90338-8 of NSN 5315-01-175-6666 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 90338-8 is a Pin Shoulder Headless manufactured by Langley Corp under CAGE Code 83549. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 90338-8

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 90338-8 with NSN 5315-01-175-6666, 5315011756666

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5315-01-175-6666

Item PartTypeName:

PIN,SHOULDER,HEADLESS

53150117566660N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
90338-8593

Characteristics Data of NSN 5315-01-175-6666, 5315011756666

MRCCriteriaCharacteristic
AAGZFIRST END STYLECHAMFERED
AAHPSECOND END STYLECHAMFERED
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.660 INCHES MINIMUM AND 0.680 INCHES MAXIMUM
AATRSHANK LENGTH0.434 INCHES MINIMUM AND 0.435 INCHES MAXIMUM
AAVHSHOULDER DIAMETER1.250 INCHES NOMINAL
AAZESHANK DIAMETER1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM
ABHPOVERALL LENGTH2.500 INCHES MINIMUM AND 2.520 INCHES MAXIMUM
ABQZINTERNAL DRIVE STYLESLOT
AMCSFIRST END TAPER LENGTH0.190 INCHES NOMINAL
AMFMSECOND END TAPER LENGTH0.050 INCHES NOMINAL
CQBBSECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
CQFMHARDNESS RATING35.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL
CQJXNOMINAL THREAD SIZE0.437 INCHES
CQTRSECOND SHANK DIAMETER0.619 INCHES MINIMUM AND 0.620 INCHES MAXIMUM
CRDYFIRST END LOCATIONUNTHREADED END
CRMGFIRST END TAPER ANGLE30.0 DEGREES NOMINAL
CTHCSECOND END TAPER ANGLE45.0 DEGREES NOMINAL
CWASSECOND SHANK LENGTH0.750 INCHES NOMINAL
MATTMATERIALSTEEL COMP XM-12 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5659 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLSTYLE DESIGNATORSHOULDER
THSDTHREAD SERIES DESIGNATORUNF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top