9250 by Meggitt International Ltd with NSN 5930-00-797-4937 - Submit a Quote

Part Number:  9250
Manufacturer:  meggitt international ltd
Item Name :  switch rotary
CAGE Code:  58880
FSC:  5930 Switches
INC Code:  02134

ASAP Aviation Procurement is pleased to announce that part number 9250 of NSN 5930-00-797-4937 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 9250 is a Switch Rotary manufactured by Meggitt International Ltd under CAGE Code 58880. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 9250

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 9250 with NSN 5930-00-797-4937, 5930007974937

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-00-797-4937

Item PartTypeName:

SWITCH,ROTARY

59300079749370P
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
9250295

Characteristics Data of NSN 5930-00-797-4937, 5930007974937

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2B SINGLE MOUNTING FACILITY
ABNBFIRST FLAT LENGTH0.560 INCHES NOMINAL SINGLE ACTUATOR
ABXFSHAFT LENGTH0.620 INCHES NOMINAL SINGLE ACTUATOR
AFBHINDIVIDUAL SECTION QUANTITY5
AFDSLONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS1.250 INCHES NOMINAL SINGLE MOUNTING FACILITY
AFDVLONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS1.250 INCHES NOMINAL SINGLE MOUNTING FACILITY
AJZESWITCH CONTACT BASIC DESIGNNONPILE-UP SYMMETRICAL
AKPYTHROW QUANTITY7 EACH SECTION PERIPHERY
CQJXNOMINAL THREAD SIZE0.138 INCHES SINGLE MOUNTING FACILITY
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY7 SINGLE ACTUATOR
CRSJSHAFT TYPEROUND,FLATTED SINGLE ACTUATOR
CSCFTERMINAL TYPETURRET
CSHWCONTACT SWITCHING ACTIONBREAKS BEFORE MAKES EACH SECTION PERIPHERY
CTDNSWITCH ACTUATOR STOP DEVICE TYPEFIXED STOP SINGLE ACTUATOR
CTHFCONTACT LOAD CURRENT RATING2.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
FEATSPECIAL FEATURESCROSSTALK SHALL NOT EXCEED 40DB DOWN WITH 2000 OHMS BETWEEN TERMINALS AND GROUND AND A 2V RMS 2 KC SIGNAL APPLIED TO ANY TERMINAL
STYLSTYLE DESIGNATORTAP,SQUARE FRAME
THSDTHREAD SERIES DESIGNATORUNC SINGLE MOUNTING FACILITY
ABHPOVERALL LENGTH7.000 INCHES NOMINAL
ABKWOVERALL HEIGHT2.010 INCHES MAXIMUM
ABMKOVERALL WIDTH2.350 INCHES MAXIMUM
ABNCFLAT HEIGHT0.219 INCHES NOMINAL SINGLE ACTUATOR
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL SINGLE ACTUATOR
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.138 INCHES NOMINAL SINGLE MOUNTING FACILITY
AFDTSHORTEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS0.625 INCHES NOMINAL SINGLE MOUNTING FACILITY
AFDWSHORTEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS0.625 INCHES NOMINAL SINGLE MOUNTING FACILITY
AKPXPOLE QUANTITY2 EACH SECTION PERIPHERY
AXGYMOUNTING METHODBRACKET SINGLE MOUNTING FACILITY AND THREADED HOLE SINGLE MOUNTING FACILITY
CMLPTHREAD QUANTITY PER INCH32 SINGLE MOUNTING FACILITY
CQMKCONTACT VOLTAGE RATING IN VOLTS118.0 AC AT SEA LEVEL
CQRQSHAFT FLAT/SLOT ANGULAR LOCATION180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR
CQYJMOUNTING FACILITY PATTERNFOUR POSITION DIAMOND SINGLE MOUNTING FACILITY

Complete Aerospace and NSN Parts Purchasing Platform

asacb

AS9120B and ISO 9001:2015

asa_member

Aviation Suppliers Association Member

certified

FAA AC 0056B Accredited

supplier

AS 6081:2012 Certification

association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top