M81935/2-04L by Military Specifications with NSN 3120-01-116-1243 - Submit a Quote

Part Number:  M81935/2-04L
Alternate P/N:  M81935/204L
Manufacturer:  military specifications
Item Name :  bearing plain rod end
CAGE Code:  81349
FSG:  31 Bearings
INC Code:  13209

ASAP Aviation Procurement is pleased to announce that part number M81935/2-04L of NSN 3120-01-116-1243 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number M81935/2-04L is a Bearing Plain Rod End manufactured by Military Specifications under CAGE Code 81349. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for M81935/2-04L

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number M81935/2-04L with NSN 3120-01-116-1243, 3120011161243

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-01-116-1243

Item PartTypeName:

BEARING,PLAIN,ROD END

31200111612430N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
MS21243-4L595

Characteristics Data of NSN 3120-01-116-1243, 3120011161243

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3B
AAJFTHREAD DIRECTIONLEFT-HAND
AAZFSHANK STYLEINTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE
ABHPOVERALL LENGTH1.8720 INCHES NOMINAL
ABXVBORE DIAMETER0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
AGGFOUTER MEMBER OUTSIDE DIAMETER0.7960 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM
AGGGBORE CENTER TO SHANK END DISTANCE1.4590 INCHES MINIMUM AND 1.4790 INCHES MAXIMUM
AGGHOUTER MEMBER WIDTH0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM
AGGJINNER MEMBER WIDTH0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
AGGYSHANK THREAD LENGTH0.7500 INCHES MINIMUM
AGHAINSPECTION HOLE CENTER TO END DISTANCE0.3745 INCHES NOMINAL
AGHBSHANK WIDTH ACROSS WRENCH FLATS0.4270 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM
AGKPSTATIC RADIAL LOAD RATING4860 POUNDS
AWDPTHREAD DIAMETER0.312 INCHES NOMINAL
CMLPTHREAD QUANTITY PER INCH24
MATTMATERIALSTEEL COMP 440C INNER MEMBER
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER
STYLSTYLE DESIGNATORBALL TYPE
THSDTHREAD SERIES DESIGNATORUNJF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top