MS13987-1 by Military Standards Corp with NSN 3120-00-374-9733 - Submit a Quote

Part Number:  MS13987-1
Alternate P/N:  MS139871
Manufacturer:  military standards corp
Item Name :  bearing half sleeve
CAGE Code:  96906
FSG:  31 Bearings
INC Code:  22210

ASAP Aviation Procurement is pleased to announce that part number MS13987-1 of NSN 3120-00-374-9733 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number MS13987-1 is a Bearing Half Sleeve manufactured by Military Standards Corp under CAGE Code 96906. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS13987-1

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number MS13987-1 with NSN 3120-00-374-9733, 3120003749733

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-00-374-9733

Item PartTypeName:

BEARING HALF,SLEEVE

31200037497330N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
M16822695

Characteristics Data of NSN 3120-00-374-9733, 3120003749733

MRCCriteriaCharacteristic
AAUBHOLE DIAMETER0.3000 INCHES MINIMUM FIRST AND 0.3200 INCHES MAXIMUM FIRST
ABHPOVERALL LENGTH1.6200 INCHES MINIMUM AND 1.6300 INCHES MAXIMUM
ADARBODY OUTSIDE DIAMETER2.4375 INCHES NOMINAL
ADASBODY INSIDE DIAMETER2.2469 INCHES MINIMUM AND 2.2479 INCHES MAXIMUM
ADZGLUBRICATION MATERIALLUBRICATING OIL
AGKDDISTANCE FROM CENTERLINE OF OPENING TO LEFT END OF BEARING0.8030 INCHES MINIMUM FIRST AND 0.8230 INCHES MAXIMUM FIRST
AGKHLUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR
AGKTLOCKING LUG HEIGHT0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM
AGKULOCKING LUG LENGTH0.1900 INCHES MINIMUM AND 0.2200 INCHES MAXIMUM
AGKVLOCKING LUG WIDTH0.1750 INCHES MINIMUM AND 0.1800 INCHES MAXIMUM
BZLXCORNER SHAPESQUARE ALL CORNERS
CTJMANTIROTATION/LUBRICATION TYPE AND QUANTITY2 HOLE
CTLFHOLE SPACING ANGLE35.0 DEGREES NOMINAL
CTMQSURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL
CTRQDISTANCE FROM LUG END TO END OF BEARING0.4395 INCHES MINIMUM AND 0.4470 INCHES MAXIMUM
MATTMATERIALCOPPER ALLOY INNER LAYER
MATTMATERIALSTEEL COMP 1008 OUTER LAYER AND STEEL COMP 1010 OUTER LAYER
SFTTSURFACE TREATMENTTIN OVERALL
STYLSTYLE DESIGNATORHALF SLEEVE,PLAIN,NO OUTSIDE FLANGES

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top