GS830U1-3 by Northrop Grumman Systems Corporation with NSN 5970-01-117-5671 - Submit a Quote

Part Number:  GS830U1-3
Alternate P/N:  GS830U13
CAGE Code:  26512
INC Code:  61626

ASAP Aviation Procurement is pleased to announce that part number GS830U1-3 of NSN 5970-01-117-5671 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number GS830U1-3 is a Insulation Sleeving Electrical S manufactured by Northrop Grumman Systems Corporation under CAGE Code 26512. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GS830U1-3

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number GS830U1-3 with NSN 5970-01-117-5671, 5970011175671

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5970-01-117-5671

Item PartTypeName:

INSULATION SLEEVING,ELECTRICAL,S

59700111756710P
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
GS830U1-3C27

Characteristics Data of NSN 5970-01-117-5671, 5970011175671

MRCCriteriaCharacteristic
ABJHTEMP RATING-55.0 DEG CELSIUS
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT
AFZPLARGE END WALL THICKNESS OF MAIN BODY0.050 INCHES MAXIMUM AS SUPPLIED
AFZPLARGE END WALL THICKNESS OF MAIN BODY0.050 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AFZQSMALL END WALL THICKNESS OF MAIN BODY0.040 INCHES MAXIMUM AS SUPPLIED
AFZQSMALL END WALL THICKNESS OF MAIN BODY0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
AGAJMAIN BODY SMALL END INSIDE DIAMETER0.210 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
AGAJMAIN BODY SMALL END INSIDE DIAMETER0.500 INCHES MINIMUM AS SUPPLIED
AGAKMAIN BODY LARGE END INSIDE DIAMETER0.500 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY
AGAKMAIN BODY LARGE END INSIDE DIAMETER0.600 INCHES MINIMUM AS SUPPLIED
CQBCMINIMUM TENSILE STRENGTH1500 POUNDS PER SQUARE INCH
FLEXFLEXIBILITYSEMIRIGID
HGTHHEIGHT1.380 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY
HUESCOLORBLACK
MATTMATERIALPLASTIC POLYOLEFIN
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONRT-301,RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE
UKBGDIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS20.0 VOLTS PER MIL /0.001 INCH

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top