01-262 by Ontic Engineering And Manufacturing Inc with NSN 3120-00-441-9814 - Submit a Quote

Part Number:  01-262
Alternate P/N:  01262
Item Name :  bearing sleeve
CAGE Code:  45934
FSG:  31 Bearings
INC Code:  13205

ASAP Aviation Procurement is pleased to announce that part number 01-262 of NSN 3120-00-441-9814 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 01-262 is a Bearing Sleeve manufactured by Ontic Engineering And Manufacturing Inc under CAGE Code 45934. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 01-262

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 01-262 with NSN 3120-00-441-9814, 3120004419814

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-00-441-9814

Item PartTypeName:

BEARING,SLEEVE

31200044198140N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
01-262623

Characteristics Data of NSN 3120-00-441-9814, 3120004419814

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH0.4688 INCHES NOMINAL
ADARBODY OUTSIDE DIAMETER0.5560 INCHES MINIMUM AND 0.5565 INCHES MAXIMUM
ADASBODY INSIDE DIAMETER0.3749 INCHES MINIMUM AND 0.3754 INCHES MAXIMUM
AEPRFLANGE OUTSIDE DIAMETER0.7994 INCHES MINIMUM AND 0.7998 INCHES MAXIMUM
AGFFFLANGE WIDTH0.2415 INCHES MINIMUM AND 0.2420 INCHES MAXIMUM
AGKHLUBRICANT ACCOMMODATION STYLEGROOVED OPEN BOTH ENDS
BZLXCORNER SHAPESQUARE INSIDE LEFT CORNER
BZLXCORNER SHAPESQUARE INSIDE RIGHT CORNER
BZLXCORNER SHAPESQUARE LEFT FLANGE BODY CORNER
BZLXCORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
BZLXCORNER SHAPESQUARE OUTSIDE LEFT CORNER
BZLXCORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CSYMSURFACE FINISH20.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
CSYMSURFACE FINISH20.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
CTMQSURFACE GROOVE LOCATION AND QUANTITY2 INTERNAL
FEATSPECIAL FEATURESONE SIDE OF FLANGE FLATTED TO 0.3910 TO 0.4007 IN.
SFTTSURFACE TREATMENTLEAD INSIDE DIAMETER SURFACE OF BODY
SFTTSURFACE TREATMENTLEAD LEFT END SURFACE OF BODY AND FLANGE
STYLSTYLE DESIGNATORSOLID,EXTERNAL FLANGE ONE END

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top