50120010-12 PART NO. 50129001 by Ortho Cycle Co with NSN 5315-01-444-0458 - Submit a Quote

Part Number:  50120010-12 PART NO. 50129001
Alternate P/N:  5012001012PARTNO.50129001
Manufacturer:  ortho cycle co
Item Name :  pin grooved headed
CAGE Code:  0DGH4
INC Code:  02382

ASAP Aviation Procurement is pleased to announce that part number 50120010-12 PART NO. 50129001 of NSN 5315-01-444-0458 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 50120010-12 PART NO. 50129001 is a Pin Grooved Headed manufactured by Ortho Cycle Co under CAGE Code 0DGH4. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 50120010-12 PART NO. 50129001

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 50120010-12 PART NO. 50129001 with NSN 5315-01-444-0458, 5315014440458

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5315-01-444-0458

Item PartTypeName:

PIN,GROOVED,HEADED

53150144404580N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
5012900161CA

Characteristics Data of NSN 5315-01-444-0458, 5315014440458

MRCCriteriaCharacteristic
FEATSPECIAL FEATURESEND ITEM HAS HEX LONG-ARM ALLEN WRENCH
HGTHHEIGHT0.380 INCHES NOMINAL
STYLSTYLE DESIGNATORGROOVE
AAGZFIRST END STYLECHAMFERED
ABMZDIAMETER0.875 INCHES NOMINAL
ABNZEFFECTIVE LENGTH5.560 INCHES NOMINAL
ABPBUNDER HEAD LENGTH8.180 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.620 INCHES NOMINAL
ABPDSECOND UNDERCUT WIDTH0.620 INCHES NOMINAL
AMCSFIRST END TAPER LENGTH0.083 INCHES NOMINAL
CRMGFIRST END TAPER ANGLE45.0 DEGREES NOMINAL
CRRGPIN HEAD DIAMETER0.843 INCHES NOMINAL

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top