49151 by Pentair Valves And Controls with NSN 4820-01-391-9797 - Submit a Quote

Part Number:  49151
Manufacturer:  pentair valves and controls
Item Name :  valve safety relief
CAGE Code:  15187
FSG:  48 Valves
INC Code:  05488

ASAP Aviation Procurement is pleased to announce that part number 49151 of NSN 4820-01-391-9797 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 49151 is a Valve Safety Relief manufactured by Pentair Valves And Controls under CAGE Code 15187. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 49151

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 49151 with NSN 4820-01-391-9797, 4820013919797

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4820-01-391-9797

Item PartTypeName:

VALVE,SAFETY RELIEF

48200139197970N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
A-49151 AND CDS H-50488C25

Characteristics Data of NSN 4820-01-391-9797, 4820013919797

MRCCriteriaCharacteristic
ADSYVALVE DISCHARGE FLOW RATE44700.0 POUNDS PER HOUR
AECSBOLT HOLE QUANTITY8 2ND END
ARKNFLANGE SHAPEROUND WITH HOLES 1ST END
CQGMMAXIMUM OPERATING PRESSURE725.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
CSDCOPENING PRESSURE SETTING625.0 POUNDS PER SQUARE INCH
CWCKNOMINAL THICKNESS1.125 INCHES 1ST END
CWDFFLANGE FACE DESIGNRAISED STRAIGHT 1ST END
ADQUFLOW CONTROL DEVICEDISK
CWCDNOMINAL OUTSIDE DIAMETER7.500 INCHES 2ND END
CWCQBOLT HOLE NOMINAL DIAMETER0.875 INCHES 1ST END
CWDFFLANGE FACE DESIGNRAISED STRAIGHT 2ND END
CWDLRAISED FACE NOMINAL DIAMETER5.500 INCHES 1ST END
FEATSPECIAL FEATURESMOD2 2-1/2J X 3-1/2HNJ
MATTMATERIALSTEEL BODY
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASTM A216 ASSN STD SINGLE MATERIAL RESPONSE BODY
STYLSTYLE DESIGNATORANGLE FLANGED ENDS
AQLRVALVE OPERATION METHODMANUAL
AWLSCONNECTION TYPEFLANGE 1ST END
CQCYADJUSTABLE PRESSURE RANGE696.0 TO 760.0 POUNDS PER SQUARE INCH
CWCTBOLT CIRCLE NOMINAL DIAMETER7.250 INCHES 1ST END
MATTMATERIALSTEEL STEM
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAISI 304 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASTM A53 ASSN STD SINGLE MATERIAL RESPONSE STEM
AECSBOLT HOLE QUANTITY8 1ST END
ARKNFLANGE SHAPEROUND WITH HOLES 2ND END
AWLSCONNECTION TYPEFLANGE 2ND END
CWCDNOMINAL OUTSIDE DIAMETER9.000 INCHES 1ST END
CWCQBOLT HOLE NOMINAL DIAMETER0.875 INCHES 2ND END
CWCTBOLT CIRCLE NOMINAL DIAMETER5.875 INCHES 2ND END
CWDHRAISED FACE NOMINAL HEIGHT0.062 INCHES 1ST END
CWDLRAISED FACE NOMINAL DIAMETER4.125 INCHES 2ND END
MATTMATERIALSTEEL COMP 304 FLOW CONTROL DEVICE
TMQYFURNISHED ITEMS AND QUANTITY1 LEVER

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top