810588-4 by Ryeson Corporation with NSN 5120-00-832-6224 - Submit a Quote

Part Number:  810588-4
Alternate P/N:  8105884
Manufacturer:  ryeson corporation
CAGE Code:  64334
FSG:  51 Hand Tools
INC Code:  19037

ASAP Aviation Procurement is pleased to announce that part number 810588-4 of NSN 5120-00-832-6224 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 810588-4 is a Screwdriver Bit Set And Handle manufactured by Ryeson Corporation under CAGE Code 64334. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 810588-4

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Characteristics Data of NSN 5120-00-832-6224, 5120008326224

MRCCriteriaCharacteristic
MRCDecoded RequirementClear Text Reply
FEATSPECIAL FEATURESSET SHALL CONSIST OF THE FOLLOWING SEVEN (7) COMPONENTS: ONE TORQUE LIMITING SCREWDRIVER,0.2 TO 4.0 NM,AND 2-36 IN-LBS; SCREWDRIVER TORQUES IN BOTH LEFT AND RIGHT DIRECTIONS; ONE 1/4 INCH HEX TO 1/4 INCH SQUARE DRIVE ADAPTER; ONE NUMBER 1 AND ONE NUMBER 2 PHILLIPS POWER BIT WITH OVERALL LENGTH OF 1-15/16 INCHES PORM 1/8 INCH; ONE 0.024 INCH THICK BY 0.134 INCH DIAMETER AND ONE 0.034 INCH THICK BY 0.187 INCH DIAMETER FLAT TIP POWER SCREWDRIVER BITS WITH OVERALL LENGTH OF 1-15/16 INCHES PORM 1/8 INCH; AND ONE CASE.

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top