J518 by Society Of Automotive Engineers Inc with NSN 4730-01-503-0937 - Submit a Quote

Part Number:  J518
Item Name :  flange pipe
CAGE Code:  81343
INC Code:  03798

ASAP Aviation Procurement is pleased to announce that part number J518 of NSN 4730-01-503-0937 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number J518 is a Flange Pipe manufactured by Society Of Automotive Engineers Inc under CAGE Code 81343. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for J518

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number J518 with NSN 4730-01-503-0937, 4730015030937

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4730-01-503-0937

Item PartTypeName:

FLANGE,PIPE

4730015030937YN
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
SAE-J518-2513

Characteristics Data of NSN 4730-01-503-0937, 4730015030937

MRCCriteriaCharacteristic
ABKKFLANGE DIAMETER2.000 INCHES NOMINAL"
ABMDRECESS DIAMETER2.844 INCHES NOMINAL"
ABMHRECESS DEPTH0.355 INCHES NOMINAL"
ABNMTHICKNESS1.030 INCHES NOMINAL"
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.062 INCHES NOMINAL"
ADVDOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.810 INCHES NOMINAL"
AECSBOLT HOLE QUANTITY4"
AFQNFLANGE LENGTH3.940 INCHES MINIMUM AND 4.060 INCHES MAXIMUM"
AGAVEND ITEM IDENTIFICATIONNSN3930-01-417-2886 - TRUCK, FORKLIFT 1000M"
AGFFFLANGE WIDTH3.720 INCHES NOMINAL"
AHNXBOLT HOLE DIAMETER0.531 INCHES NOMINAL"
AJEGNECK HEIGHT0.293 INCHES NOMINAL"
AJEMFLANGE SECTION STYLERAISED FACED, DISHED"
AJEQREDUCER FLANGE HOLE TYPECONCENTRIC"
AKWEFACE SEATING SURFACE CONDITIONMACHINED"
CBBLFEATURES PROVIDEDO RING"
CQCJMAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED3000.0 POUNDS PER SQUARE INCH FUEL/OIL, HYDROCARBON"
MATTMATERIALSTEEL OR IRON"
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-DTL-52525E MIL SPEC SINGLE MATERIAL RESPONSE"
STYLSTYLE DESIGNATORBOLT HOLE CONNECTOR PLATE"
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-DTL-52525/16C GOVERNMENT SPECIFICATION AND 81343-J518 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD"
ZZZTNONDEFINITIVE SPEC/STD DATA4 FIGURE"
ABKKFLANGE DIAMETER2.000 INCHES NOMINAL"
ABMDRECESS DIAMETER2.844 INCHES NOMINAL"
ABMHRECESS DEPTH0.355 INCHES NOMINAL"
ABNMTHICKNESS1.030 INCHES NOMINAL"
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.062 INCHES NOMINAL"
ADVDOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.810 INCHES NOMINAL"
AECSBOLT HOLE QUANTITY4"
AFQNFLANGE LENGTH3.940 INCHES MINIMUM AND 4.060 INCHES MAXIMUM"
AGAVEND ITEM IDENTIFICATIONNSN3930-01-417-2886 - TRUCK, FORKLIFT 1000M"
AGFFFLANGE WIDTH3.720 INCHES NOMINAL"
AHNXBOLT HOLE DIAMETER0.531 INCHES NOMINAL"
AJEGNECK HEIGHT0.293 INCHES NOMINAL"
AJEMFLANGE SECTION STYLERAISED FACED, DISHED"
AJEQREDUCER FLANGE HOLE TYPECONCENTRIC"
AKWEFACE SEATING SURFACE CONDITIONMACHINED"
CBBLFEATURES PROVIDEDO RING"
CQCJMAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED3000.0 POUNDS PER SQUARE INCH FUEL/OIL, HYDROCARBON"
MATTMATERIALSTEEL OR IRON"
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-DTL-52525E MIL SPEC SINGLE MATERIAL RESPONSE"
STYLSTYLE DESIGNATORBOLT HOLE CONNECTOR PLATE"
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-DTL-52525/16C GOVERNMENT SPECIFICATION AND 81343-J518 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD"
ZZZTNONDEFINITIVE SPEC/STD DATA4 FIGURE"

Complete Aerospace and NSN Parts Purchasing Platform

asacb

AS9120B and ISO 9001:2015

asa_member

Aviation Suppliers Association Member

certified

FAA AC 0056B Accredited

supplier

AS 6081:2012 Certification

association

ESD S20.20-2014 Certification

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top