HT4011-6-5 by Sps Technologies Inc with NSN 5305-01-046-3965 - Submit a Quote

Part Number:  HT4011-6-5
Alternate P/N:  HT401165
Manufacturer:  sps technologies inc
Item Name :  screw shoulder
CAGE Code:  K5673
FSC:  5305 Screws
INC Code:  22846

ASAP Aviation Procurement is pleased to announce that part number HT4011-6-5 of NSN 5305-01-046-3965 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number HT4011-6-5 is a Screw Shoulder manufactured by Sps Technologies Inc under CAGE Code K5673. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HT4011-6-5

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number HT4011-6-5 with NSN 5305-01-046-3965, 5305010463965

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-046-3965

Item PartTypeName:

SCREW,SHOULDER

53050104639650N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
HT4011-6-521C9

Characteristics Data of NSN 5305-01-046-3965, 5305010463965

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.490 INCHES MINIMUM AND 0.557 INCHES MAXIMUM
AASBFASTENER LENGTH0.812 INCHES MINIMUM AND 0.859 INCHES MAXIMUM
AASKHEAD STYLEFLAT COUNTERSUNK
AASLHEAD DIAMETER0.542 INCHES MINIMUM AND 0.596 INCHES MAXIMUM
AATNSHOULDER DIAMETER0.406 INCHES MAXIMUM FIRST SHOULDER
AATXSHOULDER LENGTH0.302 INCHES MINIMUM FIRST SHOULDER AND 0.322 INCHES MAXIMUM FIRST SHOULDER
ABQZINTERNAL DRIVE STYLEHIGH-TORQUE
AHYMNOMINAL THREAD DIAMETER0.375 INCHES
CMLPTHREAD QUANTITY PER INCH24
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CWYBSHOULDER SHAPEROUND FIRST SHOULDER
FEATSPECIAL FEATURESINTERNAL HEXAGON SOCKET 0.158 IN. MIN AND 0.162 IN. MAX WIDTH ACROSS FLATS,0.190 IN. DEEP IN. THREAD END
MATTMATERIALSTEEL COMP XM-13 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top