HL550-8-9 by Sps Technologies Inc with NSN 5320-00-728-1552 - Submit a Quote

Part Number:  HL550-8-9
Alternate P/N:  HL55089
Manufacturer:  sps technologies inc
Item Name :  pin rivet
CAGE Code:  80539
FSC:  5320 Rivets
INC Code:  67165

ASAP Aviation Procurement is pleased to announce that part number HL550-8-9 of NSN 5320-00-728-1552 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number HL550-8-9 is a Pin Rivet manufactured by Sps Technologies Inc under CAGE Code 80539. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HL550-8-9

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Generate New Image

Type the code from the image

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number HL550-8-9 with NSN 5320-00-728-1552, 5320007281552

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5320-00-728-1552

Item PartTypeName:

PIN-RIVET

5320007281552N
CIICHCCESDPMICCriticalityENAC
A0
Part NumberISCRNVCRNCCHCCMSDSSADC
3M247A4-9125

Characteristics Data of NSN 5320-00-728-1552, 5320007281552

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AASBFASTENER LENGTH1.002 INCHES MINIMUM AND 1.022 INCHES MAXIMUM
AAZFSHANK STYLEPIN-RIVET,STRAIGHT,THREADED
AAZGHEAD MAJOR DIAMETER0.387 INCHES MINIMUM AND 0.412 INCHES MAXIMUM
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
CQJXNOMINAL THREAD SIZE0.250 INCHES
CQSXSHEAR STRENGTH95000 SINGLE POUNDS PER SQUARE INCH
MATTMATERIALSTEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
AAJFTHREAD DIRECTIONRIGHT-HAND
AASUHEAD HEIGHT0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
AATBWIDTH BETWEEN FLATS0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
AAZESHANK DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
ANEEGRIP LENGTH0.587 INCHES MAXIMUM
CMLPTHREAD QUANTITY PER INCH28
SFTTSURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top