128465-2 by Sypris Electronics Llc with NSN 3020-00-876-4443 - Submit a Quote

Part Number:  128465-2
Alternate P/N:  1284652
Manufacturer:  sypris electronics llc
Item Name :  gear bevel
CAGE Code:  14028
INC Code:  05463

ASAP Aviation Procurement is pleased to announce that part number 128465-2 of NSN 3020-00-876-4443 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number 128465-2 is a Gear Bevel manufactured by Sypris Electronics Llc under CAGE Code 14028. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 128465-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number 128465-2 with NSN 3020-00-876-4443, 3020008764443

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3020-00-876-4443

Item PartTypeName:

GEAR,BEVEL

30200087644430N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
L96YBORE0.375IN225

Characteristics Data of NSN 3020-00-876-4443, 3020008764443

MRCCriteriaCharacteristic
AAQLBODY STYLEPLAIN,SOLID
AJLATEETH QUANTITY24
ANTPBORE STYLEPLAIN BOTH ENDS
CTQYMOUNTING HOLE TYPE AND QUANTITY1 PLAIN TRANSVERSELY THROUGH HUB,FIRST END AND 1 THREADED TRANSVERSELY THROUGH HUB,FIRST END
CWCDNOMINAL OUTSIDE DIAMETER1.060 INCHES
CWQDPITCH ANGLE45.0000 DEGREES
CWRMFACE NOMINAL WIDTH0.200 INCHES
STYLSTYLE DESIGNATORPERIPHERAL FACE,BACK HUB PROTRUDING
ABSXATTACHMENT METHODMOUNTING HOLE
AGJSPITCH DIAMETER1.0000 INCHES NOMINAL
CMLKMOUNTING HOLE THREAD SERIES DESIGNATORUNC TRANSVERSELY THROUGH HUB,FIRST END
CMLMMOUNTING HOLE THREAD QUANTITY PER INCH48 TRANSVERSELY THROUGH HUB,FIRST END
CQLTMOUNTING HOLE NOMINAL THREAD SIZE3.000 INCHES TRANSVERSELY THROUGH HUB,FIRST END
CWFRNOMINAL OVERALL LENGTH0.562 INCHES
CWMWTEETH TYPESTRAIGHT
CWPPPRESSURE ANGLE20.0000 DEGREES
CWQLNOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.281 INCHES SECOND END
CWRSBORE NOMINAL DIAMETER0.375 INCHES BOTH ENDS
CWTRHUB STYLE DESIGNATORPLAIN SECOND END
CWTXHUB NOMINAL DIAMETER0.625 INCHES SECOND END
CWZKMOUNTING HOLE NOMINAL DIAMETER0.062 INCHES TRANSVERSELY THROUGH HUB,FIRST END
MATTMATERIALSTEEL OVERALL

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top