VCG0036-6-21 by Valley Todeco Inc with NSN 5306-01-480-6062 - Submit a Quote

Part Number:  VCG0036-6-21
Alternate P/N:  VCG0036621
Manufacturer:  valley todeco inc
Item Name :  bolt shear
CAGE Code:  06710
FSC:  5306 Bolts
INC Code:  15903

ASAP Aviation Procurement is pleased to announce that part number VCG0036-6-21 of NSN 5306-01-480-6062 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number VCG0036-6-21 is a Bolt Shear manufactured by Valley Todeco Inc under CAGE Code 06710. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for VCG0036-6-21

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.
Generate New Image

Type the code from the image

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number VCG0036-6-21 with NSN 5306-01-480-6062, 5306014806062

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5306-01-480-6062

Item PartTypeName:

BOLT,SHEAR

53060148060620NA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
VCG0036-6-21523

Characteristics Data of NSN 5306-01-480-6062, 5306014806062

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A"
AAJFTHREAD DIRECTIONRIGHT-HAND"
AASATHREAD LENGTH0.645 INCHES NOMINAL"
AASBFASTENER LENGTH1.947 INCHES MINIMUM AND 1.967 INCHES MAXIMUM"
AASKHEAD STYLESPLINE EXTENDED WASHER"
AASUHEAD HEIGHT0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM"
AATCEXTENDED WASHER DIAMETER0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM"
AATDEXTENDED WASHER THICKNESS0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM"
AAURGRIP DIAMETER0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM"
AAZHHEAD MINOR DIAMETER0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM"
AGAVEND ITEM IDENTIFICATIONC-17A"
AHYMNOMINAL THREAD DIAMETER0.375 INCHES"
ANEEGRIP LENGTH1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM"
CMLPTHREAD QUANTITY PER INCH24"
CQBCMINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH"
CSYMSURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD"
CSYMSURFACE FINISH32.0 MICROINCHES GRIP"
MATTMATERIALNICKEL ALLOY 718 OVERALL"
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTTSURFACE TREATMENTPASSIVATE OVERALL"
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSDTHREAD SERIES DESIGNATORUNJF"
AAJDTHREAD CLASS3A"
AAJFTHREAD DIRECTIONRIGHT-HAND"
AASATHREAD LENGTH0.645 INCHES NOMINAL"
AASBFASTENER LENGTH1.947 INCHES MINIMUM AND 1.967 INCHES MAXIMUM"
AASKHEAD STYLESPLINE EXTENDED WASHER"
AASUHEAD HEIGHT0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM"
AATCEXTENDED WASHER DIAMETER0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM"
AATDEXTENDED WASHER THICKNESS0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM"
AAURGRIP DIAMETER0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM"
AAZHHEAD MINOR DIAMETER0.423 INCHES MINIMUM AND 0.438 INCHES MAXIMUM"
AGAVEND ITEM IDENTIFICATIONC-17A"
AHYMNOMINAL THREAD DIAMETER0.375 INCHES"
ANEEGRIP LENGTH1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM"
CMLPTHREAD QUANTITY PER INCH24"
CQBCMINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH"
CSYMSURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD"
CSYMSURFACE FINISH32.0 MICROINCHES GRIP"
MATTMATERIALNICKEL ALLOY 718 OVERALL"
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTTSURFACE TREATMENTPASSIVATE OVERALL"
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSDTHREAD SERIES DESIGNATORUNJF"

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top