A3041651 by Zf Industrieantriebe Witten Gmbh with NSN 5315-01-305-4462 - Submit a Quote

Part Number:  A3041651
Item Name :  pin shoulder headless
CAGE Code:  D9182
INC Code:  16749

ASAP Aviation Procurement is pleased to announce that part number A3041651 of NSN 5315-01-305-4462 is now available and in stock. We can get you one of the fastest and most competitive quotes on this part. Part number A3041651 is a Pin Shoulder Headless manufactured by Zf Industrieantriebe Witten Gmbh under CAGE Code D9182. Simply fill out the Request for Quote (RFQ) form provided here to get started on your quote. In order to make sure that we get you your quote in a timely manner, please take the time to make sure that all fields are completely filled out, particularly the asterisk-marked (*) fields like Parts Needed By and Quantity (ea). 

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for A3041651

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

NSN Information for Part Number A3041651 with NSN 5315-01-305-4462, 5315013054462

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5315-01-305-4462

Item PartTypeName:

PIN,SHOULDER,HEADLESS

53150130544620N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
3041651695

Characteristics Data of NSN 5315-01-305-4462, 5315013054462

MRCCriteriaCharacteristic
AAGZFIRST END STYLEPOINTED
AAVHSHOULDER DIAMETER0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
ABHPOVERALL LENGTH0.250 INCHES MAXIMUM
ABPRFIRST STEP DIAMETER0.0686 INCHES MINIMUM AND 0.0694 INCHES MAXIMUM
ABPTSECOND STEP DIAMETER0.046 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
ABPUSECOND STEP LENGTH0.008 INCHES MINIMUM AND 0.010 INCHES MAXIMUM
ABPVTHIRD STEP DIAMETER0.0302 INCHES MINIMUM AND 0.0308 INCHES MAXIMUM
ABPWTHIRD STEP LENGTH0.033 INCHES MINIMUM AND 0.035 INCHES MAXIMUM
AJWRSHOULDER LENGTH0.038 INCHES NOMINAL
CQBBSECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
CRDYFIRST END LOCATIONBOTH ENDS
CRMGFIRST END TAPER ANGLE25.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM
CSYMSURFACE FINISH32.0 MICROINCHES BOTH ENDS
FEATSPECIAL FEATURESTWO ADDITIONAL STEPS PRECEDING FIRST STEP DIMENSION AS FOLLOWED DESIGNATED AS STEP A 0.046 IN. MIN. 0.050 IN. MAX DIA. ADJACENT TO FIRST STEP,DESIGNATED AS STEP B 0.0302 IN. MIN. 0.0308 IN. MAX DIA. 0.033 IN. MIN. 0.035 IN. MAX. LENGTH ADJ
MATTMATERIALSTEEL COMP 416 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASTM A582,COND T ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STYLSTYLE DESIGNATORSHOULDER

Semiconductor’s Certifications and Memberships



Thank You for Your Visit!

Before You Go, Take a look To Our Extensive Range of NSN Parts Catalog. We Provide High Quality NSN Parts with 24/7 Quotation Facility.

Request for Quote

We use cookies to ensure that we give you the excellent experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top